Replicant

CLK100=100000000

[ 0.000000] c0 EXYNOS4: ACLK400=24000000 ACLK266=800000000

[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[ 0.000000] c0 uclk1: source is mout_mpll_user (6), rate is 200000000

[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_csis: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_cam0: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_cam1: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_fimc: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_fimd: source is mout_mpll_user (6), rate is 400000000

[ 0.000000] c0 sclk_fimd: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_mdnie: source is mout_mpll_user (6), rate is 400000000

[ 0.000000] c0 sclk_mdnie: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_mdnie_pwm: source is xusbxti (1), rate is 1500000

[ 0.000000] c0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000

[ 0.000000] c0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000

[ 0.000000] c0 sclk_pwi: source is xusbxti (1), rate is 3000000

[ 0.000000] c0 S5P/CMA: Reserved 0x70000000/0x00bcc000 for 'fimc_is'

[ 0.000000] c0 S5P/CMA: Reserved 0x71700000/0x00800000 for 'fimd'

[ 0.000000] c0 S5P/CMA: Reserved 0x6c300000/0x03d00000 for 'fimc0'

[ 0.000000] c0 S5P/CMA: Reserved 0x71600000/0x00100000 for 'srp'

[ 0.000000] c0 S5P/CMA: Reserved 0x64000000/0x00400000 for 'mfc-normal'

[ 0.000000] c0 S5P/CMA: Reserving 0x7800000 for secure region aligned by 0x4000000.

[ 0.000000] c0 S5P/CMA: Reserved 0x5c000000/0x00100000 for 'sectbl'

[ 0.000000] c0 S5P/CMA: Reserved 0x5c100000/0x03100000 for 'mfc-secure'

[ 0.000000] c0 S5P/CMA: Reserved 0x5f200000/0x04600000 for 'ion'

[ 0.000000] c0 (sec_debug_set_upload_magic) 66262564

[ 0.000000] c0 (sec_debug_set_upload_cause) cafebabe

[ 0.000000] c0 On node 0 totalpages: 261632

[ 0.000000] c0 free_area_init_node: node 0, pgdat c09f3660, node_mem_map c0e84000

[ 0.000000] c0 Normal zone: 1632 pages used for memmap

[ 0.000000] c0 Normal zone: 0 pages reserved

[ 0.000000] c0 Normal zone: 207264 pages, LIFO batch:31

[ 0.000000] c0 HighMem zone: 412 pages used for memmap

[ 0.000000] c0 HighMem zone: 52324 pages, LIFO batch:15

[ 0.000000] c0 sec_debug_magic_init: success reserving magic code area

[ 0.000000] c0 PERCPU: Embedded 7 pages/cpu @c168c000 s7008 r8192 d13472 u32768

[ 0.000000] c0 pcpu-alloc: s7008 r8192 d13472 u32768 alloc=8*4096

[ 0.000000] c0 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

[ 0.000000] c0 Built 1 zonelists in Zone order, mobility grouping on.Total pages: 259588

[ 0.000000] c0 Kernel command line: console=ttySAC2,115200 consoleblank=0 androidboot.hardware=smdk4x12 console=ram loglevel=4 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.debug_level=0x4f4c sec_log=0x100000@0x46000000 s3cfb.bootloaderfb=0x5ec00000 lcdtype=96 consoleblank=0 lpcharge=0 lpj=3981312 vmalloc=144m oops=panic pmic_info=65 cordon=4dee960c38072f098a681f886de25993 connie=GT-I9300_OPEN_EUR_a63047dd907d01d4c638fa13cb57bf70 androidboot.emmc_checksum=3 androidboot.odin_download=1 androidboot.bootloader=I9300XXUGNG3 androidboot.serialno=3230158f0c5c802d snd_soc_core.pmdown_time=1000

[ 0.000000] c0 sec_log_setup: *sec_log_mag:4d474f4c *sec_log_ptr:62402 sec_log_buf:fd200000 sec_log_size:1048576

[ 0.000000] c0 sec_log_save_old: saved old log at 131072@c16ab120

[ 0.000000] c0 sec_getlog_supply_kloginfo: 0xc6000000

[ 0.000000] c0 battery_get_lpm_state: Low power charging mode: 0

[ 0.000000] c0 /home/fil/repsource/kernel/samsung/smdk4412/drivers/misc/max77693-muic.c get_if_pmic_inifo: switch_sel: 1 if_pmic_rev:4

[ 0.000000] c0 PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] c0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] c0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] c0 allocated 4186112 bytes of page_cgroup

[ 0.000000] c0 please try 'cgroup_disable=memory' option if you don't want memory cgroups

[ 0.000000] c0 Memory: 1022MB = 1022MB total

[ 0.000000] c0 Memory: 772768k/772768k available, 273760k reserved, 210944K highmem

[ 0.000000] c0 Virtual kernel memory layout:

[ 0.000000] c0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)

[ 0.000000] c0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)

[ 0.000000] c0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)

[ 0.000000] c0 vmalloc : 0xf3800000 - 0xfc000000 ( 136 MB)

[ 0.000000] c0 lowmem : 0xc0000000 - 0xf3000000 ( 816 MB)

[ 0.000000] c0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)

[ 0.000000] c0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)

[ 0.000000] c0 .init : 0xc0008000 - 0xc0042000 ( 232 kB)

[ 0.000000] c0 .text : 0xc0042000 - 0xc0898000 (8536 kB)

[ 0.000000] c0 .data : 0xc0898000 - 0xc0a078c0 (1471 kB)

[ 0.000000] c0 .bss : 0xc0a078e4 - 0xc0e83ef8 (4594 kB)

[ 0.000000] c0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] c0 Preemptible hierarchical RCU implementation.

[ 0.000000] c0 NR_IRQS:501

[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify

[ 0.000000] c0 Console: colour dummy device 80x30

[ 0.000000] c0 Calibrating delay loop (skipped) preset value.. 1592.52 BogoMIPS (lpj=3981312)

[ 0.000000] c0 pid_max: default: 32768 minimum: 301

[ 0.000000] c0 Security Framework initialized

[ 0.000000] c0 SELinux: Initializing.

[ 0.000000] c0 SELinux: Starting in permissive mode

[ 0.000000] c0 Mount-cache hash table entries: 512

[ 0.000000] c0 Initializing cgroup subsys debug

[ 0.000000] c0 Initializing cgroup subsys cpuacct

[ 0.000000] c0 Initializing cgroup subsys memory

[ 0.000000] c0 Initializing cgroup subsys freezer

[ 0.000000] c0 CPU: Testing write buffer coherency: ok

[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify

[ 0.000000] c0 notifier_call_chain : NOTIFY BAD tick_notify

[ 0.000000] c0 L310 cache controller enabled

[ 0.000000] c0 l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B

[ 0.030000] c1 CPU1: Booted secondary processor

[ 0.030000] c1 CPU1: Booted secondary processor

[ 0.030000] c1 notifier_call_chain : NOTIFY BAD tick_notify

[ 0.060000] c2 CPU2: Booted secondary processor

[ 0.060000] c2 CPU2: Booted secondary processor

[ 0.060000] c2 notifier_call_chain : NOTIFY BAD tick_notify

[ 0.090000] c3 CPU3: Booted secondary processor

[ 0.090000] c3 CPU3: Booted secondary processor

[ 0.090000] c3 notifier_call_chain : NOTIFY BAD tick_notify

[ 0.100000] c0 Brought up 4 CPUs

[ 0.100000] c0 SMP: Total of 4 processors activated (6370.09 BogoMIPS).

[ 0.105000] c0 gpio: GPK0 has missing PM functions

[ 0.105000] c0 print_constraints: dummy:

[ 0.110000] c0 NET: Registered protocol family 16

[ 0.110000] c0 migrating range 72000 72280, retry (0)

[ 0.135000] c0 DMA: preallocated 2560 KiB pool for atomic coherent allocations

[ 0.140000] c0 midas_config_gpio_table

[ 0.140000] c0 midas_power_init

[ 0.140000] c0 [TSP] midas_tsp_init() is called

[ 0.140000] c0 Registered chained gpio int handler for interrupt 110.

[ 0.140000] c0 Registered interrupt support for gpio group 25.

[ 0.140000] c0 midas_tsp_init touch : 387

[ 0.140000] c0 Sound: start midas_sound_init

[ 0.140000] c0 Registered chained gpio int handler for interrupt 111.

[ 0.140000] c0 Registered interrupt support for gpio group 11.

[ 0.140000] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3)

[ 0.140000] c0 midas_machine_init() register sii9234 driver

[ 0.140000] c0 Registered interrupt support for gpio group 10.

[ 0.140000] c0 mipi_fb_init :: fb_platform_data.hw_ver = 0x70

[ 0.140000] c0 usb: smdk4212_usbgadget_init: default luns=0, new luns=2

[ 0.140000] c0 brcm_wlan_init: start

[ 0.140000] c0 brcm_init_wlan_mem: WIFI MEM Allocated

[ 0.140000] c0 -----------------------------------------------------

[ 0.140000] c0 -----------------------------------------------------

[ 0.140000] c0 -----------------------------------------------------

[ 0.140000] c0 regist ret:0

[ 0.145000] c0 ram_console: invalid start 0 or end 0

[ 0.155000] c0 exynos4_pmu_init: PMU supports 4412(96)

[ 0.155000] c0 S3C Power Management, Copyright 2004 Simtec Electronics

[ 0.155000] c0 EXYNOS4: Initializing architecture

[ 0.155000] c0 s3c-adc samsung-adc-v4: attached adc driver

[ 0.155000] c0 samsung-pd samsung-pd.0: power domain registered

[ 0.155000] c0 samsung-pd samsung-pd.1: power domain registered

[ 0.155000] c0 samsung-pd samsung-pd.2: power domain registered

[ 0.155000] c0 lcd0 disable skip only one time

[ 0.155000] c0 samsung-pd samsung-pd.5: power domain registered

[ 0.155000] c0 samsung-pd samsung-pd.4: power domain registered

[ 0.155000] c0 samsung-pd samsung-pd.6: power domain registered

[ 0.160000] c0 samsung-pd samsung-pd.8: power domain registered

[ 0.160000] c0 samsung-pd samsung-pd.7: power domain registered

[ 0.160000] c0 s3c24xx-pwm s3c24xx-pwm.0: tin at 100000000, tdiv at 100000000, tin=divclk, base 0

[ 0.160000] c0 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8

[ 0.160000] c0 s3c24xx-pwm s3c24xx-pwm.2: tin at 100000000, tdiv at 100000000, tin=divclk, base 12

[ 0.160000] c0 s3c24xx-pwm s3c24xx-pwm.3: tin at 100000000, tdiv at 100000000, tin=divclk, base 16

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.15: Initialized for s5p-fimg2d.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.3: Initialized for s3c-fimc.2.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.12: Initialized for s5p-tvout.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.16: Initialized for exynos4-fimc-is.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.17: Initialized for exynos4-fimc-is.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.18: Initialized for exynos4-fimc-is.

[ 0.160000] c0 s5p-sysmmu s5p-sysmmu.19: Initialized for exynos4-fimc-is.

[ 0.190000] c0 bio: create slab <bio-0> at 0

[ 0.190000] c0 print_constraints: VBATT: 5000 mV

[ 0.190000] c0 max77686_pmic_init

[ 0.190000] c0 SCSI subsystem initialized

[ 0.190000] c0 usbcore: registered new interface driver usbfs

[ 0.190000] c0 usbcore: registered new interface driver hub

[ 0.190000] c0 usbcore: registered new device driver usb

[ 0.190000] c0 i2c-gpio i2c-gpio.19: using pins 138 (SDA) and 137 (SCL)

[ 0.195000] c0 i2c-gpio i2c-gpio.8: using pins 115 (SDA) and 114 (SCL)

[ 0.195000] c0 i2c-gpio i2c-gpio.9: using pins 47 (SDA) and 48 (SCL)

[ 0.195000] c0 i2c-gpio i2c-gpio.10: using pins 151 (SDA) and 152 (SCL)

[ 0.195000] c0 i2c-gpio i2c-gpio.11: using pins 149 (SDA) and 150 (SCL)

[ 0.195000] c0 i2c-gpio i2c-gpio.14: using pins 61 (SDA) and 60 (SCL)

[ 0.195000] c0 i2c-gpio i2c-gpio.15: using pins 51 (SDA) and 53 (SCL)

[ 0.195000] c0 i2c-gpio i2c-gpio.16: using pins 91 (SDA) and 89 (SCL)

[ 0.195000] c0 max77693_i2c_probe: device found: rev.0x4, ver.0x0

[ 0.265000] c0 max77693-safeout max77693-safeout: max77693_pmic_probe

[ 0.265000] c0 regulator regulator.2: func:max77693_reg_enable

[ 0.265000] c0 regulator regulator.2: func:max77693_get_rid

[ 0.265000] c0 regulator regulator.2: func:max77693_get_enable_register

[ 0.265000] c0 regulator regulator.2: func:max77693_get_voltage

[ 0.265000] c0 regulator regulator.2: func:max77693_get_rid

[ 0.265000] c0 regulator regulator.2: func:max77693_get_voltage_register

[ 0.265000] c0 regulator regulator.2: func:max77693_get_rid

[ 0.265000] c0 regulator regulator.2: func:max77693_list_voltage_safeout

[ 0.265000] c0 print_constraints: safeout1 range: at 4900 mV

[ 0.265000] c0 regulator regulator.3: func:max77693_get_voltage

[ 0.265000] c0 regulator regulator.3: func:max77693_get_rid

[ 0.265000] c0 regulator regulator.3: func:max77693_get_voltage_register

[ 0.265000] c0 regulator regulator.3: func:max77693_get_rid

[ 0.265000] c0 regulator regulator.3: func:max77693_list_voltage_safeout

[ 0.265000] c0 print_constraints: safeout2 range: at 4900 mV

[ 0.265000] c0 regulator regulator.4: func:max77693_reg_enable

[ 0.265000] c0 regulator regulator.4: func:max77693_get_rid

[ 0.265000] c0 regulator regulator.4: func:max77693_get_enable_register

[ 0.270000] c0 regulator regulator.4: func:max77693_get_voltage

[ 0.270000] c0 regulator regulator.4: func:max77693_get_rid

[ 0.270000] c0 regulator regulator.4: func:max77693_get_voltage_register

[ 0.270000] c0 regulator regulator.4: func:max77693_get_rid

[ 0.270000] c0 regulator regulator.4: func:max77693_list_voltage

[ 0.270000] c0 print_constraints: CHARGER: 60 <--> 2580 mA at 460 mA

[ 0.270000] c0 i2c-gpio i2c-gpio.17: using pins 266 (SDA) and 267 (SCL)

[ 0.270000] c0 i2c-gpio i2c-gpio.21: using pins 72 (SDA) and 71 (SCL)

[ 0.270000] c0 i2c-gpio i2c-gpio.12: using pins 231 (SDA) and 232 (SCL)

[ 0.270000] c0 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter

[ 0.270000] c0 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter

[ 0.270000] c0 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter

[ 0.270000] c0 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter

[ 0.270000] c0 max77686 7-0009: device found

[ 0.270000] c0 max77686_irq_init+

[ 0.270000] c0 max77686_irq_init: gpio_irq=1

[ 0.275000] c0 max77686_irq_init-

[ 0.275000] c0 max77686_pmic_probe

[ 0.280000] c0 max77686_pmic_probe: DEVICE ID=0x2

[ 0.280000] c0 print_constraints: vdd_mif range: 850 <--> 1050 mV at 1000 mV

[ 0.280000] c0 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1100 mV

[ 0.280000] c0 print_constraints: vdd_int range: 850 <--> 1100 mV at 1000 mV

[ 0.285000] c0 print_constraints: vdd_g3d range: 850 <--> 1075 mV at 1000 mV

[ 0.285000] c0 print_constraints: CAM_ISP_CORE_1.2V: 1000 <--> 1200 mV at 1100 mV

[ 0.285000] c0 print_constraints: VCC_1.8V_AP: 1800 mV

[ 0.285000] c0 print_constraints: VCC_1.8V_IO: 1800 mV

[ 0.285000] c0 print_constraints: VMIPI_1.0V: 1000 mV

[ 0.285000] c0 print_constraints: CAM_ISP_MIPI_1.2V: 1200 mV

[ 0.285000] c0 print_constraints: VMIPI_1.8V: 1800 mV

[ 0.290000] c0 print_constraints: VABB1_1.95V: 1950 mV

[ 0.290000] c0 print_constraints: VUOTG_3.0V: 3000 mV

[ 0.290000] c0 print_constraints: VABB2_1.95V: 1950 mV

[ 0.290000] c0 print_constraints: CAM_SENSOR_CORE_1.2V: 1200 mV

[ 0.290000] c0 print_constraints: CAM_ISP_SENSOR_1.8V: 1800 mV

[ 0.290000] c0 print_constraints: VT_CAM_1.8V: 1800 mV

[ 0.290000] c0 print_constraints: VTF_2.8V: 2800 mV

[ 0.295000] c0 print_constraints: TSP_AVDD_3.3V: 3300 mV

[ 0.295000] c0 print_constraints: VDD_1.8V_TSP: 1800 mV

[ 0.295000] c0 print_constraints: VCC_3.3V_LCD: 3300 mV

[ 0.295000] c0 print_constraints: VCC_MOTOR_3.0V: 3000 mV

[ 0.295000] c0 print_constraints: 32KHZ_PMIC:

[ 0.295000] c0 s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter

[ 0.295000] c0 max77686 5-0009: device not found on this channel (this is not an error)

[ 0.295000] c0 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter

[ 0.295000] c0 Advanced Linux Sound Architecture Driver Version 1.0.24.

[ 0.300000] c0 Bluetooth: Core ver 2.16

[ 0.300000] c0 NET: Registered protocol family 31

[ 0.300000] c0 Bluetooth: HCI device and connection manager initialized

[ 0.300000] c0 Bluetooth: HCI socket layer initialized

[ 0.300000] c0 Bluetooth: L2CAP socket layer initialized

[ 0.300000] c0 Bluetooth: SCO socket layer initialized

[ 0.300000] c0 cfg80211: Calling CRDA to update world regulatory domain

[ 0.300000] c0 Switching to clocksource mct-frc

[ 0.302959] c0 Switched to NOHz mode on CPU #0

[ 0.303364] c3 Switched to NOHz mode on CPU #3

[ 0.303393] c2 Switched to NOHz mode on CPU #2

[ 0.303451] c1 Switched to NOHz mode on CPU #1

[ 0.314145] c0 NET: Registered protocol family 2

[ 0.314369] c0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.315159] c0 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.317058] c0 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[ 0.318080] c0 TCP: Hash tables configured (established 131072 bind 65536)

[ 0.318118] c0 TCP reno registered

[ 0.318145] c0 UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.318206] c0 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.318611] c0 NET: Registered protocol family 1

[ 0.318845] c0 Trying to unpack rootfs image as initramfs...

[ 0.367757] c0 Freeing initrd memory: 820K

[ 0.367888] c0 PMU: registered new PMU device of type 0

[ 0.368124] c0 Exynos4 : ARM Clock down on idle mode is enabled

[ 0.369984] c0 gps_bcm475x_init - system_rev : c

[ 0.370219] c0 i2c 15-0039: i2c_add_devices - added sii9234_mhl_tx successfully

[ 0.370420] c0 i2c 15-003d: i2c_add_devices - added sii9234_tpi successfully

[ 0.370614] c0 i2c 15-0049: i2c_add_devices - added sii9234_hdmi_rx successfully

[ 0.370810] c0 i2c 15-0064: i2c_add_devices - added sii9234_cbus successfully

[ 0.371018] c0 i2c 5-003a: i2c_add_devices - added s5p_ddc successfully

[ 0.371230] c0 i2c 5-002b: i2c_add_devices - added pn65n successfully

[ 0.371268] c0 accel_gpio_init

[ 0.371291] c0 gyro_gpio_init

[ 0.371477] c0 i2c 1-0019: i2c_add_devices - added lsm330dlc_accel successfully

[ 0.371675] c0 i2c 1-006b: i2c_add_devices - added lsm330dlc_gyro successfully

[ 0.371716] c0 optical_gpio_init

[ 0.371900] c0 i2c 9-0018: i2c_add_devices - added cm36651 successfully

[ 0.371938] c0 ak8975c_gpio_init

[ 0.372120] c0 i2c 10-000c: i2c_add_devices - added ak8975 successfully

[ 0.372157] c0 lps331_gpio_init

[ 0.372338] c0 i2c 11-005d: i2c_add_devices - added lps331ap successfully

[ 0.373476] c0 wake enabled for irq 374

[ 0.373706] c0 sec-thermistor sec-thermistor: sec_therm_probe: SEC Thermistor Driver Loading

[ 0.374204] c0 migrating range 72280 72281, retry (0)

[ 0.384120] c0 Loaded driver for PL330 DMAC-0 s3c-pl330

[ 0.384157] c0 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32

[ 0.384375] c0 migrating range 72281 72282, retry (0)

[ 0.393754] c0 Loaded driver for PL330 DMAC-1 s3c-pl330

[ 0.393789] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[ 0.393999] c0 migrating range 72282 72283, retry (0)

[ 0.403366] c0 Loaded driver for PL330 DMAC-2 s3c-pl330

[ 0.403401] c0 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32

[ 0.403763] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.403923] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.404389] c0 audit: initializing netlink socket (disabled)

[ 0.404448] c0 type=2000 audit(0.400:1): initialized

[ 0.409545] c0 highmem bounce pool size: 64 pages

[ 0.409887] c0 ashmem: initialized

[ 0.423932] c0 fuse init (API version 7.16)

[ 0.424755] c0 msgmni has been set to 1242

[ 0.424880] c0 SELinux: Registering netfilter hooks

[ 0.425411] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.425547] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.425679] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.425818] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.425949] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.426077] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.426203] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.426337] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.426561] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.426710] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.426886] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.427500] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.427661] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.427700] c2 alg: comp: Compression test 1 failed for lzo-generic: output len = 57

[ 0.427825] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.427858] c2 FIPS: No test for lz4 (lz4-generic)

[ 0.427948] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 0.427982] c2 FIPS: No test for stdrng (krng)

[ 0.428038] c0 io scheduler noop registered

[ 0.428065] c0 io scheduler deadline registered

[ 0.428192] c0 io scheduler cfq registered (default)

[ 0.428221] c0 io scheduler row registered

[ 0.428246] c0 io scheduler sio registered

[ 0.428449] c0 s3cfb s3cfb.0: vclk=57153600, div=14(2), rate=400000000

[ 0.428574] c0 s3cfb s3cfb.0: fimd sclk rate 400000000, clkdiv 0xffff11

[ 0.428931] c0 s3cfb s3cfb.0: [fb2] dma: 0x71700000, cpu: 0xf38a9000, size: 0x00708000

[ 0.432498] c0 sec_getlog_supply_fbinfo: 0x71700000 720 1280 32 2

[ 0.436670] c0 Bootloader sent 'bootloaderfb' : 5EC00000

[ 0.437688] c0 s3cfb s3cfb.0: parent clock: 400000000, vclk: 57155000, vclk div: 7

[ 0.437829] c0 graphics fb0: mout_mpll rate is 800000000, fimd divider=7

[ 0.437869] c0 graphics fb0: 60hz div is 2

[ 0.437895] c0 graphics fb0: 40hz div is 3

[ 0.437934] c0 graphics fb0: lcdfreq_init is done

[ 0.437963] c0 s3cfb s3cfb.0: registered successfully

[ 0.438518] c0 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD

[ 0.438559] c0 mdnie mdnie: registered successfully

[ 0.453292] c0 s5p-dsim s5p-dsim.0: rxhd : 1000031a

[ 0.453323] c0 s5p-dsim s5p-dsim.0: rcv size : 3

[ 0.453352] c0 s5p-dsim s5p-dsim.0: pkt-l : 109060a2

[ 0.453384] c0 lcd panel: ID: a2, 60, 90

[ 0.453408] c0 lcd panel: s6e8aa0 lcd panel driver has been probed.

[ 0.453442] c0 Dynamic ELVSS Information, 0x10

[ 0.470006] c0 s5p-dsim s5p-dsim.0: rxhd : 1500181a

[ 0.470054] c0 s5p-dsim s5p-dsim.0: rcv size : 24

[ 0.470083] c0 s5p-dsim s5p-dsim.0: pkt : fd060600

[ 0.470112] c0 s5p-dsim s5p-dsim.0: pkt : fd010708

[ 0.470141] c0 s5p-dsim s5p-dsim.0: pkt : fd02ff00

[ 0.470169] c0 s5p-dsim s5p-dsim.0: pkt : f6010806

[ 0.470197] c0 s5p-dsim s5p-dsim.0: pkt : fd000b00

[ 0.470226] c0 s5p-dsim s5p-dsim.0: pkt : fc010807

[ 0.470382] c0 look index : 14

[ 0.470401] c0 look index : 31

[ 0.470420] c0 look index : 51

[ 0.470439] c0 look index : 73

[ 0.470484] c0 AID Dimming is started. 96

[ 0.486719] c0 lcd panel: brightness=160, bl=18, candela=160

[ 0.486760] c0 s5p_gpioint_set_type irq:400 is at GPF3(0)

[ 0.486912] c0 s5p-dsim s5p-dsim.0: mipi-dsi driver has been probed

[ 0.487444] c0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled

[ 0.820370] c0 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10

[ 0.900084] c0 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10

[ 0.980079] c0 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10

[ 1.032202] c0 console [ttySAC2] enabled

[ 1.075084] c0 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10

[ 1.155427] c0 Mali: ::Q::exynos_result_of_asv : 0

[ 1.155459] c0 Mali: mali_dvfs[0].vol = 950000

[ 1.155488] c0 Mali: mali_dvfs[1].vol = 975000

[ 1.155517] c0 Mali: mali_runtime_resume.vol = 975000

[ 1.155547] c0 Mali: mali_dvfs[2].vol = 1050000

[ 1.155575] c0 Mali: mali_dvfs[3].vol = 1100000

[ 1.155602] c0 Mali: init_gpu_vol = 1100000

[ 1.156020] c0 Mali: Mali frequency 440

[ 1.156046] c0 Mali: init_mali_clock mali_clock c0975018

[ 1.156263] c0 Mali: = regulator_set_voltage: 1100000, 1100000

[ 1.156662] c0 Mali: Mali frequency 440

[ 1.157129] c0 migrating range 72300 72b00, retry (0)

[ 1.184203] c0 Mali: Mali device driver loaded

[ 1.184559] c0 UMP: UMP device driver 0000 loaded

[ 1.192726] c0 brd: module loaded

[ 1.196784] c0 loop: module loaded

[ 1.197385] c0 zram: Created 1 device(s) ...

[ 1.197433] c0 lkdtm: No crash points registered, enable through debugfs

[ 1.198075] c0 func:max77693_muic_init

[ 1.198167] c0 func:max77693_muic_probe

[ 1.198201] c0 max77693-muic max77693-muic: adc:437 chgtype:441, adc1k440

[ 1.198489] c0 input: max77693-muic as /devices/platform/i2c-gpio.17/i2c-17/17-0066/max77693-muic/input/input0

[ 1.198553] c0 max77693-muic max77693-muic: H/W rev connected UT1 UR2 pin to AP UART

[ 1.198594] c0 max77693_muic_probe: switch_sel: 1

[ 1.198920] c0 MUIC ret=0

[ 1.198943] c0 max77693-muic max77693-muic: func:max77693_muic_set_adcdbset value:2

[ 1.198985] c0 max77693-muic max77693-muic: max77693_muic_set_adcdbset: ADCDBSET(0x20)

[ 1.199900] c0 max77693-muic max77693-muic: func:max77693_muic_irq_init

[ 1.199938] c0 max77693-muic max77693-muic: max77693_muic_irq_init: system_rev=c

[ 1.210161] c0 max77693-muic max77693-muic: adc:437 chgtype:441 adc1k:440 vbvolt:445

[ 1.210701] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=7, val=9

[ 1.211237] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=8, val=11

[ 1.211773] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=9, val=0

[ 1.212307] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=1, val=0

[ 1.212842] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=2, val=0

[ 1.213377] c0 max77693-muic max77693-muic: max77693_muic_irq_init: reg=3, val=0

[ 1.213911] c0 max77693_set_jig_state: 0

[ 1.214559] c0 print_constraints: WM1811 LDO1: at 3000 mV

[ 1.215043] c0 print_constraints: WM1811 LDO2: at 1050 mV

[ 1.245632] c0 wm8994 4-001a: Succeeded to read ID register

[ 1.247772] c0 wm8994 4-001a: WM1811 revision C CUST_ID 00

[ 1.252637] c0 Loading pn65n driver

[ 1.252701] c0 pn65n 5-002b: pn65n_probe : IRQ num 367

[ 1.252926] c0 pn65n 5-002b: pn65n_probe : requesting IRQ 367

[ 1.255036] c0 PPP generic driver version 2.4.2

[ 1.255674] c0 PPP Deflate Compression module registered

[ 1.255707] c0 PPP BSD Compression module registered

[ 1.256120] c0 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 1.256190] c2 notifier_call_chain : NOTIFY BAD cryptomgr_notify

[ 1.256492] c0 PPP MPPE Compression module registered

[ 1.256525] c0 NET: Registered protocol family 24

[ 1.256555] c0 tun: Universal TUN/TAP device driver, 1.6

[ 1.256585] c0 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[ 1.256971] c0 usbcore: registered new interface driver ath9k_htc

[ 1.257197] c0 host_notifier host_notifier.0: notifier_prove

[ 1.257849] c0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.258071] c0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.258424] c0 usbcore: registered new interface driver usblp

[ 1.258459] c0 Initializing USB Mass Storage driver...

[ 1.258629] c0 usbcore: registered new interface driver usb-storage

[ 1.258664] c0 USB Mass Storage support registered.

[ 1.258985] c0 usbcore: registered new interface driver usbserial

[ 1.259021] c0 usbserial: USB Serial Driver core

[ 1.259180] c0 USB Serial support registered for pl2303

[ 1.259351] c0 usbcore: registered new interface driver pl2303

[ 1.259384] c0 pl2303: Prolific PL2303 USB to serial adaptor driver

[ 1.259698] c0 migrating range 72283 72284, retry (0)

[ 1.263949] c0 max77693-muic:max77693_muic_dock_detect CONTROL1:0

[ 1.264592] c0 max77693-muic:max77693_muic_dock_detect STATUS1:0x3f, 2:0x41

[ 1.264635] c0 max77693-muic:max77693_muic_dock_detect adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:17

[ 1.270852] c0 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics

[ 1.270893] c0 s3c-udc : version 15 March 2009

[ 1.270921] c0 init

[ 1.271544] c0 usb: android_bind disconnect

[ 1.271571] c0 usb: usb_gadget_disconnect

[ 1.273807] c0 usb: usb_string_id cdev(0xeb9bf540)->next_string_id=1

[ 1.273956] c0 android_usb gadget: Mass Storage Function, version: 2009/09/11

[ 1.273997] c0 android_usb gadget: Number of LUNs=1

[ 1.274028] c0 lun0: LUN: removable file: (no medium)

[ 1.274922] c0 usb: usb_string_id cdev(0xeb9bf540)->next_string_id=2

[ 1.274960] c0 usb: usb_string_id cdev(0xeb9bf540)->next_string_id=3

[ 1.275001] c0 usb: usb_string_id cdev(0xeb9bf540)->next_string_id=4

[ 1.275060] c0 usb: composite_bind idVendor=0x0, idProduct=0x0

[ 1.275093] c0 usb: composite_bind bcdDevice=0x0

[ 1.275121] c0 usb: composite_bind composite_manufacturer=

[ 1.275157] c0 android_usb gadget: android_usb ready

[ 1.275184] c0 usb: Skip udc_enable

[ 1.275563] c0 mousedev: PS/2 mouse device common for all mice

[ 1.276748] c0 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1

[ 1.277024] c0 [keys]PWR 0

[ 1.277512] c0 input: sec_touchscreen as /devices/platform/s3c2440-i2c.3/i2c-3/3-0048/input/input2

[ 1.277747] c0 [TSP] melfas_power on

[ 1.380321] c0 melfas-ts 3-0048: [TSP]fw version 0xbd !!!!

[ 1.380524] c0 melfas-ts 3-0048: [TSP]hw rev = 0x01

[ 1.381049] c0 [TSP] ISC Ver [0xbd] [0x22] [0x22]

[ 1.384124] c0 melfas-ts 3-0048: 4.8 fw version update does not need

[ 1.384788] c0 [TSP] ISC Ver [0xbd] [0x22] [0x22]

[ 1.388908] c0 s5p_gpioint_set_type irq:387 is at GPM2(3)

[ 1.389103] c0 melfas-ts 3-0048: Melfas MMS-series touch controller initialized

[ 1.390823] c0 max77686_rtc_probe

[ 1.415209] c0 max77686-rtc max77686-rtc: max77686_rtc_init_reg: bypass init

[ 1.415253] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_wtsr: enable WTSR

[ 1.465046] c0 max77686-rtc max77686-rtc: max77686_rtc_enable_smpl: enable SMPL

[ 1.540405] c0 max77686_rtc_read_time: 117/7/23 11:16:59(3)

[ 1.565386] c0 max77686_rtc_read_alarm: 117/7/23 12:26:18(3)

[ 1.566054] c0 using rtc device, max77686-rtc, for alarms

[ 1.566110] c0 max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0

[ 1.566157] c0 max77686_irq_unmask: group=2, cur=0xfd

[ 1.566766] c0 S3C24XX RTC, (c) 2004,2006 Simtec Electronics

[ 1.567178] c0 s3c-rtc exynos-rtc: rtc core: registered s3c as rtc1

[ 1.567399] c0 i2c /dev entries driver

[ 1.570678] c0 Linux media interface: v0.10

[ 1.571122] c0 lirc_dev: IR Remote Control driver registered, major 249

[ 1.571160] c0 IR NEC protocol handler initialized

[ 1.571188] c0 IR RC5(x) protocol handler initialized

[ 1.571216] c0 IR RC6 protocol handler initialized

[ 1.571243] c0 IR JVC protocol handler initialized

[ 1.571270] c0 IR Sony protocol handler initialized

[ 1.571298] c0 IR RC5 (streamzap) protocol handler initialized

[ 1.571330] c0 IR LIRC bridge handler initialized

[ 1.571356] c0 Linux video capture interface: v2.00

[ 1.571838] c0 s5c73m3_spi_init

[ 1.573536] c0 s5c73m3_spi successfully probed

[ 1.578364] c0 [INFO]flite_probe:2121: FIMC-LITE0 probe success

[ 1.578430] c0 [INFO]flite_probe:2121: FIMC-LITE1 probe success

[ 1.578728] c0 fimc_is_init_mem_mgr : [cma_info] start_addr : 0x70000000, end_addr : 0x70bcc000, total_size : 0xbcc000, free_size : 0xbcc000

[ 1.578857] c0 ctrl->mem.base = 0x70000000

[ 1.578881] c0 ctrl->mem.size = 0xbcc000

[ 1.578905] c0 ctrl->mem.fw_ref_base = 0x70a01000

[ 1.578932] c0 ctrl->mem.setfile_ref_base = 0x70b81000

[ 1.579458] c0 FIMC-IS probe completed

[ 1.579735] c0 s3c-csis: Samsung MIPI-CSIS0 driver probed successfully

[ 1.579802] c0 s3c-csis: Samsung MIPI-CSIS1 driver probed successfully

[ 1.579987] c0 Initialize JPEG driver

[ 1.582532] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12

[ 1.582762] c0 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11

[ 1.583038] c0 S5P HPD Driver, (c) 2009 Samsung Electronics

[ 1.583316] c0 s5p_int_src_ext_hpd()

[ 1.583344] c0 s5p_hpd_read_gpio(0)

[ 1.583533] c0 s5p_hpd_read_gpio(0)

[ 1.584170] c0 i2c i2c-5: attached s5p_ddc into i2c adapter successfully

[ 1.584335] c0 i2c-core: driver [s5p_ddc] using legacy suspend method

[ 1.584371] c0 i2c-core: driver [s5p_ddc] using legacy resume method

[ 1.584636] c0 mfc_init_mem_mgr[581] cma 0x5c100000 0x5f200000 0x3100000 0x3100000 1

[ 1.584687] c0 mfc_init_mem_mgr[641]: base 0x5c100000, size 0x3100000, addr 0xdc100000

[ 1.585111] c0 MFC(Multi Function Codec - FIMV v5.x) registered successfully

[ 1.585776] c0 Samsung Graphics 2D driver, (c) 2011 Samsung Electronics

[ 1.586160] c0 sii9234_cfg_gpio()

[ 1.586196] c0 s5p_gpioint_set_type irq:405 is at GPF3(5)

[ 1.586234] c0 sii9234_mhl_tx_i2c_probe(): wake lock is initialized.

[ 1.586458] c0 s5p_gpioint_set_type irq:405 is at GPF3(5)

[ 1.586575] c0 sii9234 : create mhl sysfile

[ 1.587162] c0 input: sii9234_rcp as /devices/virtual/input/input3

[ 1.588113] c0 max17047_fuelgauge_i2c_probe: fuelgauge init

[ 1.589392] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 1.590676] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 1.590708] c0 max17047_fuelgauge_i2c_probe: rsoc=6121, fsoc=9850, soc=62

[ 1.592684] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 1.594737] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 1.596352] c0 max17047_set_salrt: min(1%), max(255%)

[ 1.597490] c0 max17047_set_talrt: min(0x80), max(0x7f)

[ 1.598627] c0 max17047_set_valrt: min(0mV), max(5100mV)

[ 1.601036] c0 wake enabled for irq 371

[ 1.601060] c0 max17047_test_read

[ 1.601086] c0 max17047_test_read: 1/1/1970 00:00

[ 1.670377] c0 0 1 2 3 4 5 6 7 8 9 a b c d e f

[ 1.670429] c0 00| 0000 ff00 7f80 ff01 0000 0523 41bf 6400 1600 c7ba 0000 0000 0014 3d3b 3cda 04c9

[ 1.670472] c0 10| 07d0 ffff 1e2f 4600 0290 0148 1600 0003 07d0 c5e8 1616 c8b9 00ff 2314 03c0 04b5

[ 1.670516] c0 20| 4d78 00ac 1e00 07d0 1400 2305 1600 7fd8 0700 4ea4 203b 0003 e3e1 290e 0000 0000

[ 1.670559] c0 30| c3e6 c392 1306 0800 0100 07d2 0780 05e0 0065 0930 9c5c 7fff 1680 1400 152a e000

[ 1.670602] c0 40| 0000 0000 0c00 2f7d c4b2 007d 0c80 0000 3d38 ef3a 04c9 e800 ffff ffff ff3a 93de

[ 1.670645] c0 e0| 0653 0000 f836 0000 3de7 0200 0007 0003 4c20 fffc 4c50 0000 4000 0000 c3c0 0910

[ 1.670688] c0 f0| 0000 0000 0000 0000 0000 0000 3d3b f6c8 3fec 53d0 0001 c3ce 0064 3910 c758 3d38

[ 1.670739] c0 max17047_fuelgauge_i2c_probe: probe complete

[ 1.671039] c0 max77693_charger_probe: charger init

[ 1.674637] c0 max77693_charger_reg_init: battery cv voltage 4.35V, (sysrev 12)

[ 1.675062] c0 max77693_dump_reg

[ 1.675579] c0 max77693: c: 0xb0(0x40)

[ 1.676096] c0 max77693: c: 0xb1(0xff)

[ 1.676612] c0 max77693: c: 0xb2(0x5d)

[ 1.677127] c0 max77693: c: 0xb3(0x60)

[ 1.677643] c0 max77693: c: 0xb4(0x31)

[ 1.678159] c0 max77693: c: 0xb5(0x00)

[ 1.678675] c0 max77693: c: 0xb6(0xb6)

[ 1.679191] c0 max77693: c: 0xb7(0x05)

[ 1.679707] c0 max77693: c: 0xb8(0x34)

[ 1.680238] c0 max77693: c: 0xb9(0x80)

[ 1.680755] c0 max77693: c: 0xba(0x00)

[ 1.681272] c0 max77693: c: 0xbb(0xdd)

[ 1.681788] c0 max77693: c: 0xbc(0xd6)

[ 1.682303] c0 max77693: c: 0xbd(0x0c)

[ 1.682818] c0 max77693: c: 0xbe(0x40)

[ 1.683334] c0 max77693: c: 0xbf(0xbf)

[ 1.683850] c0 max77693: c: 0xc0(0x17)

[ 1.684365] c0 max77693: c: 0xc1(0xc1)

[ 1.684881] c0 max77693: c: 0xc2(0x00)

[ 1.685412] c0 max77693: c: 0xc3(0x07)

[ 1.685929] c0 max77693: c: 0xc4(0xc4)

[ 1.686445] c0 max77693: c: 0xc5(0x00)

[ 1.709928] c2 max77693_charger_probe: support wc power detection

[ 1.710202] c2 max77693_charger_probe: wpc deactive, set V_BUS_INT as PD

[ 1.710243] c2 max77693_charger_probe: wpc(0), vbus(1)

[ 1.710272] c2 max77693_charger_probe: probe complete

[ 1.711553] c2 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

[ 1.711866] c2 Bluetooth: HCI UART driver ver 2.2

[ 1.711898] c2 Bluetooth: HCI H4 protocol initialized

[ 1.712598] c2 cpuidle: using governor ladder

[ 1.713845] c2 cpuidle: using governor menu

[ 1.714006] c2 mshci: Mobile Storage Host Controller Interface driver

[ 1.714042] c2 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd

[ 1.714239] c2 dw_mmc dw_mmc: clock source 0: sclk_dwmci (40000000 Hz)

[ 1.714517] c2 mmc0: Version ID 0x5342240a.

[ 1.717477] c2 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########

[ 1.718967] c2 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA

[ 1.719251] c2 sdhci: Secure Digital Host Controller Interface driver

[ 1.719287] c2 sdhci: Copyright(c) Pierre Ossman

[ 1.719433] c2 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (88888888 Hz)

[ 1.719694] c2 mmc1: vtf_2.8v regulator found

[ 1.745842] c0 mmc0: cmd 52 response timeout error

[ 1.749985] c0 mmc0: cmd 52 response timeout error

[ 1.757961] c0 mmc0: cmd 8 response timeout error

[ 1.762034] c0 mmc0: cmd 5 response timeout error

[ 1.766705] c0 mmc0: cmd 5 response timeout error

[ 1.771392] c0 mmc0: cmd 5 response timeout error

[ 1.776080] c0 mmc0: cmd 5 response timeout error

[ 1.780774] c0 mmc0: cmd 55 response timeout error

[ 1.785545] c0 mmc0: cmd 55 response timeout error

[ 1.790318] c0 mmc0: cmd 55 response timeout error

[ 1.795093] c0 mmc0: cmd 55 response timeout error

[ 1.831729] c1 mmc0: 016G92: 11010030313647393230158f0c5c802d

[ 1.844317] c1 mmc0: Voltage range not supported for power class.

[ 1.844354] c1 mmc0: power class selection to bus width 8 failed

[ 1.849061] c1 mmc0: Voltage range not supported for power class.

[ 1.849098] c1 mmc0: power class selection to bus width 8 ddr 2 failed

[ 1.855566] c1 mmc0: new high speed DDR MMC card at address 0001

[ 1.856050] c1 mmcblk0: mmc0:0001 016G92 14.6 GiB

[ 1.859987] c1 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12

[ 1.863013] c0 Registered led device: mmc1::

[ 1.863435] c0 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA

[ 1.863691] c0 wake enabled for irq 380

[ 1.863717] c0 mmc1: card inserted.

[ 1.863857] c0 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (8888888 Hz)

[ 1.863952] c0 mmc2: no vmmc regulator found

[ 1.866985] c0 Registered led device: mmc2::

[ 1.867240] c0 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA

[ 1.867499] c0 aat1290a_led_probe : Probe

[ 1.874728] c0 Registered led device: led_r

[ 1.878444] c0 Registered led device: led_g

[ 1.882164] c0 Registered led device: led_b

[ 1.890355] c0 mmc1: cmd 52 command timeout error

[ 1.890709] c0 mmc1: cmd 52 command timeout error

[ 1.891029] c0 usbcore: registered new interface driver usbhid

[ 1.891063] c0 usbhid: USB HID core driver

[ 1.891636] c0 logger: created 2048K log 'log_main'

[ 1.891849] c0 logger: created 256K log 'log_events'

[ 1.892056] c0 logger: created 1024K log 'log_radio'

[ 1.892292] c0 logger: created 256K log 'log_system'

[ 1.892504] c0 logger: created 256K log 'log_sf'

[ 1.892536] c0 sec_getlog_supply_loggerinfo: 0xc0c3ddf4 0xc0b3ddf4 0xc0afddf4 0xc0abddf4

[ 1.893273] c0 [VIB] timed_output device is registrated

[ 1.897292] c0 lsm330dlc_accel_probe: is started

[ 1.897388] c0 mmc1: cmd 5 command timeout error

[ 1.897728] c0 mmc1: cmd 5 command timeout error

[ 1.897796] c0 input: accelerometer_sensor as /devices/virtual/input/input4

[ 1.898063] c0 mmc1: cmd 5 command timeout error

[ 1.898396] c0 mmc1: cmd 5 command timeout error

[ 1.900439] c2 Registered sensors device: accelerometer_sensor

[ 1.900486] c2 lsm330dlc_accel_probe: successful, position = 2

[ 1.900707] c2 lsm330dlc_gyro_probe, started

[ 1.901550] c0 input: gyro_sensor as /devices/virtual/input/input5

[ 1.901980] c0 Registered sensors device: gyro_sensor

[ 1.902038] c0 lsm330dlc_gyro_probe, position = 2

[ 1.902069] c0 lsm330dlc_gyro_probe, successful

[ 1.902264] c0 akm8975_probe is called.

[ 1.902496] c0 s5p_gpioint_set_type irq:399 is at GPJ0(7)

[ 1.903376] c0 akm8975_probe: asa_x = 159, asa_y = 158, asa_z = 169

[ 1.903749] c0 Registered sensors device: magnetic_sensor

[ 1.903790] c0 akm8975_probe is successful.

[ 1.903981] c0 cm36651_i2c_probe is called.

[ 1.904010] c0 proximity_leda_on, onoff = 1

[ 1.980192] c0 cm36651_setup_reg: initial proximity value = 2

[ 1.984889] c0 cm36651_setup_reg is success.

[ 1.984916] c0 proximity_leda_on, onoff = 0

[ 1.985267] c0 input: proximity_sensor as /devices/virtual/input/input6

[ 1.985712] c0 cm36651_setup_irq, success

[ 1.988838] c0 input: light_sensor as /devices/virtual/input/input7

[ 1.989295] c0 Registered sensors device: proximity_sensor

[ 1.989500] c0 Registered sensors device: light_sensor

[ 1.989541] c0 cm36651_i2c_probe is success.

[ 1.989767] c0 lps331ap: probe start.

[ 1.990266] c0 lps331ap I2C driver registered!

[ 1.993258] c0 input: barometer_sensor as /devices/virtual/input/input8

[ 1.995804] c0 Registered sensors device: barometer_sensor

[ 1.995850] c0 lps331ap 11-005d: lps331ap: probed

[ 1.996008] c0 i2c-core: driver [lps331ap] using legacy suspend method

[ 1.996045] c0 i2c-core: driver [lps331ap] using legacy resume method

[ 1.996535] c0 i2c-core: driver [Si47xx] using legacy suspend method

[ 1.996571] c0 i2c-core: driver [Si47xx] using legacy resume method

[ 1.997045] c0 usbcore: registered new interface driver snd-usb-audio

[ 1.998708] c0 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics

[ 1.998858] c0 audss_init: RCLK SRC[busclk]

[ 1.998970] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 1.999684] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 1.999728] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[ 1.999766] c0 i2s_txctrl: Turn Off - spr is no active

[ 1.999811] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 1.999848] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[ 2.053619] c0 wm8994-codec wm8994-codec: write 60 = 100

[ 2.054892] c0 wm8994-codec wm8994-codec: write 15 = 40

[ 2.055110] c0 wm8994-codec wm8994-codec: write 102 = 3

[ 2.055323] c0 wm8994-codec wm8994-codec: write 56 = c07

[ 2.055536] c0 wm8994-codec wm8994-codec: write 5d = 7e

[ 2.055759] c0 wm8994-codec wm8994-codec: write 5e = 0

[ 2.055973] c0 wm8994-codec wm8994-codec: write 102 = 0

[ 2.056183] c0 wm8994-codec wm8994-codec: write 38 = 30

[ 2.056397] c0 wm8994-codec wm8994-codec: write 402 = 1c0

[ 2.056610] c0 wm8994-codec wm8994-codec: write 403 = 1c0

[ 2.056823] c0 wm8994-codec wm8994-codec: write 406 = 1c0

[ 2.057037] c0 wm8994-codec wm8994-codec: write 407 = 1c0

[ 2.057251] c0 wm8994-codec wm8994-codec: write 502 = 1c0

[ 2.057474] c0 wm8994-codec wm8994-codec: write 503 = 1c0

[ 2.057688] c0 wm8994-codec wm8994-codec: write 400 = 1c0

[ 2.057902] c0 wm8994-codec wm8994-codec: write 401 = 1c0

[ 2.058116] c0 wm8994-codec wm8994-codec: write 404 = 1c0

[ 2.058329] c0 wm8994-codec wm8994-codec: write 405 = 1c0

[ 2.058542] c0 wm8994-codec wm8994-codec: write 500 = 1c0

[ 2.058755] c0 wm8994-codec wm8994-codec: write 501 = 1c0

[ 2.059006] c0 wm8994-codec wm8994-codec: write 610 = 3c0

[ 2.059220] c0 wm8994-codec wm8994-codec: write 611 = 3c0

[ 2.059434] c0 wm8994-codec wm8994-codec: write 612 = 3c0

[ 2.059648] c0 wm8994-codec wm8994-codec: write 613 = 3c0

[ 2.059860] c0 wm8994-codec wm8994-codec: write 421 = 210

[ 2.060088] c0 wm8994-codec wm8994-codec: write 423 = 210

[ 2.060311] c0 wm8994-codec wm8994-codec: write 521 = 210

[ 2.060538] c0 wm8994-codec wm8994-codec: write 34 = 10

[ 2.060759] c0 wm8994-codec wm8994-codec: write 35 = 10

[ 2.060980] c0 wm8994-codec wm8994-codec: write 38 = b0

[ 2.061201] c0 wm8994-codec wm8994-codec: write 37 = 80

[ 2.061436] c0 wm8994-codec wm8994-codec: write 440 = 9b

[ 2.061657] c0 wm8994-codec wm8994-codec: write 441 = 844

[ 2.061880] c0 wm8994-codec wm8994-codec: write 442 = e8

[ 2.062106] c0 wm8994-codec wm8994-codec: write 443 = 210

[ 2.062398] c0 mmc1: new high speed SDHC card at address aaaa

[ 2.062623] c0 wm8994-codec wm8994-codec: write 440 = 98

[ 2.062875] c0 mmcblk1: mmc1:aaaa SL32G 28.7 GiB

[ 2.063078] c0 wm8994-codec wm8994-codec: write 450 = 9b

[ 2.063623] c0 wm8994-codec wm8994-codec: write 451 = 844

[ 2.063846] c0 wm8994-codec wm8994-codec: write 452 = e8

[ 2.064071] c0 wm8994-codec wm8994-codec: write 453 = 210

[ 2.064299] c0 wm8994-codec wm8994-codec: write 450 = 98

[ 2.064526] c0 wm8994-codec wm8994-codec: write 540 = 9b

[ 2.064748] c0 wm8994-codec wm8994-codec: write 541 = 844

[ 2.064970] c0 wm8994-codec wm8994-codec: write 542 = e8

[ 2.065217] c0 wm8994-codec wm8994-codec: write 543 = 210

[ 2.065446] c0 wm8994-codec wm8994-codec: write 540 = 98

[ 2.065715] c0 wm8994-codec wm8994-codec: write 3d = 2f

[ 2.065937] c0 wm8994-codec wm8994-codec: write 3e = 27

[ 2.066162] c0 wm8994-codec wm8994-codec: write 18 = 18b

[ 2.066387] c0 wm8994-codec wm8994-codec: write 1a = 18b

[ 2.066608] c0 wm8994-codec wm8994-codec: write 19 = 18b

[ 2.066827] c0 wm8994-codec wm8994-codec: write 1b = 18b

[ 2.067052] c0 wm8994-codec wm8994-codec: write 26 = 179

[ 2.067276] c0 wm8994-codec wm8994-codec: write 27 = 179

[ 2.067497] c0 wm8994-codec wm8994-codec: write 1c = 1ed

[ 2.067717] c0 wm8994-codec wm8994-codec: write 1d = 1ed

[ 2.067943] c0 wm8994-codec wm8994-codec: write 20 = 1f9

[ 2.068167] c0 wm8994-codec wm8994-codec: write 21 = 1f9

[ 2.070860] c0 Sound: enabled mclk

[ 2.070887] c0 pmu_debug: 0x00000900

[ 2.080901] c0 Sound: state: 1, use_cnt: 1

[ 2.081230] c0 wm8994-codec wm8994-codec: write 200 = 8

[ 2.081466] c0 wm8994-codec wm8994-codec: write d0 = 100

[ 2.081691] c0 wm8994-codec wm8994-codec: write 210 = 81

[ 2.081915] c0 wm8994-codec wm8994-codec: write 211 = 81

[ 2.082163] c0 wm8994-codec wm8994-codec: write d0 = 0

[ 2.082598] c0 wm8994-codec wm8994-codec: wm1811: Rev C support mic detection

[ 2.082712] c0 wm8994-codec wm8994-codec: write d1 = ff

[ 2.083182] c0 wm8994-codec wm8994-codec: write 3b = 8

[ 2.083408] c0 wm8994-codec wm8994-codec: write 39 = 180

[ 2.083634] c0 wake enabled for irq 382

[ 2.087539] c0 wm8994-codec wm8994-codec: write 2 = 2000

[ 2.087773] c0 wm8994-codec wm8994-codec: write 4 = 300

[ 2.087999] c0 wm8994-codec wm8994-codec: write 5 = 300

[ 2.088226] c0 wm8994-codec wm8994-codec: write 208 = a

[ 2.088451] c0 wm8994-codec wm8994-codec: write 200 = 9

[ 2.088740] c0 mmcblk1: p1

[ 2.089272] c0 asoc: wm8994-aif1 <-> samsung-i2s.4 mapping ok

[ 2.089719] c0 wm8994-codec wm8994-codec: write 702 = 8101

[ 2.090192] c0 wm8994-codec wm8994-codec: write 703 = 8101

[ 2.090669] c0 wm8994-codec wm8994-codec: write 704 = 8101

[ 2.091880] c0 asoc: wm8994-aif2 <-> midas.cp mapping ok

[ 2.092875] c0 asoc: wm8994-aif3 <-> midas.bt mapping ok

[ 2.092987] c0 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 2.093029] c0 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[ 2.093069] c0 i2s_txctrl: Turn Off - spr is no active

[ 2.093124] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 2.093162] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[ 2.094332] c0 migrating range 722a0 722c0, retry (0)

[ 2.105873] c0 migrating range 722c0 722e0, retry (0)

[ 2.119567] c0 asoc: wm8994-aif1 <-> samsung-i2s.0 mapping ok

[ 2.121732] c0 input: Midas_WM1811 Midas Jack as /devices/platform/soc-audio/sound/card0/input9

[ 2.122208] c0 Samsung SRP driver, (c)2011 Samsung Electronics

[ 2.123203] c0 ALSA device list:

[ 2.123231] c0 #0: Midas_WM1811

[ 2.123383] c0 GACT probability NOT on

[ 2.123412] c0 Mirror/redirect action on

[ 2.123437] c0 u32 classifier

[ 2.123458] c0 Actions configured

[ 2.123485] c0 Netfilter messages via NETLINK v0.30.

[ 2.123567] c0 nf_conntrack version 0.5.0 (13239 buckets, 52956 max)

[ 2.124717] c0 ctnetlink v0.93: registering with nfnetlink.

[ 2.124779] c0 NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[ 2.124825] c0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[ 2.125257] c0 xt_time: kernel timezone is -0000

[ 2.126811] c0 ip_tables: (C) 2000-2006 Netfilter Core Team

[ 2.127015] c0 arp_tables: (C) 2002 David S. Miller

[ 2.127098] c0 TCP cubic registered

[ 2.128126] c0 NET: Registered protocol family 10

[ 2.131973] c0 Mobile IPv6

[ 2.132023] c0 ip6_tables: (C) 2000-2006 Netfilter Core Team

[ 2.132307] c0 IPv6 over IPv4 tunneling driver

[ 2.137096] c0 NET: Registered protocol family 17

[ 2.137154] c0 NET: Registered protocol family 15

[ 2.137309] c0 Bluetooth: RFCOMM TTY layer initialized

[ 2.137355] c0 Bluetooth: RFCOMM socket layer initialized

[ 2.137392] c0 Bluetooth: RFCOMM ver 1.11

[ 2.137421] c0 Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 2.137454] c0 Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[ 2.137706] c0 NET: Registered protocol family 35

[ 2.138097] c0 Registering the dns_resolver key type

[ 2.138169] c0 EXYNOS4X12: Adaptive Support Voltage init

[ 2.138202] c0 EXYNOS4X12(SG): ORIG : 3 MOD : 0 RESULT : 3

[ 2.138243] c0 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[ 2.138317] c0 Registering SWP/SWPB emulation handler

[ 2.138354] c0 Registering SDIV/UDIV emulation handler

[ 2.138390] c0 DVFS : VDD_ARM Voltage table set with 3 Group

[ 2.139146] c0 DVFS : VDD_INT Voltage table set with 3 Group

[ 2.139851] c0 mif: set_hsic_lpa_states: 309: called(s5p_usb_phy_init+0x138/0x324):

[ 2.139901] c0 s5p-ehci s5p-ehci: usb phy usage(2)

[ 2.140083] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2819b3 t=1

[ 2.140135] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[ 2.140180] c0 s5p-ehci s5p-ehci: S5P EHCI Host Controller

[ 2.140510] c0 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[ 2.140698] c0 migrating range 72284 72285, retry (0)

[ 2.153817] c0 migrating range 72285 72286, retry (0)

[ 2.163419] c0 migrating range 72286 72287, retry (0)

[ 2.173066] c0 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000

[ 2.180086] c0 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[ 2.180189] c0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 2.180234] c0 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.180275] c0 usb usb1: Product: S5P EHCI Host Controller

[ 2.180311] c0 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd

[ 2.180352] c0 usb usb1: SerialNumber: s5p-ehci

[ 2.180380] c0 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[ 2.181093] c0 hub 1-0:1.0: USB hub found

[ 2.181135] c0 hub 1-0:1.0: 3 ports detected

[ 2.181522] c0 CP not ready, Active State low

[ 2.181919] c0 s5p-ohci s5p-ohci: usb phy usage(6)

[ 2.181950] c0 s5p-ohci s5p-ohci: Already power on PHY

[ 2.185653] c0 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[ 2.185707] c0 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[ 2.185744] c0 s5p-ohci s5p-ohci: s5p OHCI

[ 2.186048] c0 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[ 2.186209] c0 migrating range 72287 72288, retry (0)

[ 2.195769] c0 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000

[ 2.254122] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.254165] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.254212] c0 usb usb2: Product: s5p OHCI

[ 2.254240] c0 usb usb2: Manufacturer: Linux 3.0.101-replicant ohci_hcd

[ 2.254277] c0 usb usb2: SerialNumber: s5p-ohci

[ 2.254305] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[ 2.255055] c0 hub 2-0:1.0: USB hub found

[ 2.255092] c0 hub 2-0:1.0: 3 ports detected

[ 2.255581] c0 @@@ s5p_tmu_probe: cpufreq_limit: 1st_throttle: 8, 2nd_throttle = 14

[ 2.255627] c0 s5p_tmu_probe: cpufreq_level[12], busfreq_value[133133]

[ 2.255663] c0 @@@ get_refresh_interval = 0x2e

[ 2.255689] c0 @@@ get_refresh_interval = 0x5d

[ 2.255721] c0 ** temperature set value **

[ 2.255743] c0 1st throttling stop_temp = 78, start_temp = 80

[ 2.255773] c0 2nd throttling stop_temp = 87, start_tmep = 103

[ 2.255804] c0 tripping temp = 110, s/w emergency temp = 120

[ 2.255837] c0 mem throttling stop_temp = 80, start_temp = 85

[ 2.255873] c0 tc_voltage stop_temp = 13, start_temp = 10

[ 2.258223] c0 mif: init_modem, system_rev = 12

[ 2.258263] c0 mif: check phone active = 205

[ 2.261117] c0 mif: umts_modem_cfg_gpio done

[ 2.261149] c0 mif: modem_link_pm_config_gpio done

[ 2.261449] c0 mif: modem_probe: modem_if

[ 2.265898] c0 wake enabled for irq 366

[ 2.265925] c0 mif: create_modemctl_device: xmm6262 is created!!!

[ 2.266425] c0 wake enabled for irq 361

[ 2.266710] c0 usbcore: registered new interface driver cdc_modem

[ 2.266757] c0 mif: if_usb_init: if_usb_init() done : 0, usb_ld (0xebf07000)

[ 2.266796] c0 mif: hsic_create_link_device: usb : create_link_device DONE

[ 2.266834] c0 mif: modem_probe: link created: usb

[ 2.270637] c0 mif: create_io_device: Bood device = umts_boot0

[ 2.280219] c0 mif: modem_probe: Complete!!!

[ 2.281939] c0 regulator_init_complete: VCC_3.3V_LCD: incomplete constraints, leaving on

[ 2.282992] c0 regulator regulator.4: func:max77693_reg_is_enabled

[ 2.283030] c0 regulator regulator.4: func:max77693_get_rid

[ 2.283062] c0 regulator regulator.4: func:max77693_get_enable_register

[ 2.283600] c0 regulator_init_complete: CHARGER: incomplete constraints, leaving on

[ 2.283644] c0 regulator regulator.3: func:max77693_reg_is_enabled

[ 2.283679] c0 regulator regulator.3: func:max77693_get_rid

[ 2.283710] c0 regulator regulator.3: func:max77693_get_enable_register

[ 2.284243] c0 regulator regulator.2: func:max77693_reg_is_enabled

[ 2.284277] c0 regulator regulator.2: func:max77693_get_rid

[ 2.284310] c0 regulator regulator.2: func:max77693_get_enable_register

[ 2.284841] c0 regulator_init_complete: safeout1 range: incomplete constraints, leaving on

[ 2.284943] c0 [TouchKey] i2c_touchkey_probe

[ 2.285312] c0 input: sec_touchkey as /devices/platform/i2c-gpio.8/i2c-8/8-0020/input/input10

[ 2.285599] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3)

[ 2.340308] c0 [TouchKey] OLED_DET = 1

[ 2.340424] c0 s5p_gpioint_set_type irq:395 is at GPJ0(3)

[ 2.341352] c0 touchkey_firmware_update F/W version: 0x6, Module version:0x5

[ 2.346969] c0 [TouchKey] firmware auto update do not excute

[ 2.347003] c0 [TouchKey] firmware_ver(banary=6, current=6)

[ 2.347035] c0 [TouchKey] module_ver(banary=5, current=5)

[ 2.347944] c0 [TouchKey] data[0]=8 data[1]=6 data[2]=5 data[3]=0

[ 2.451169] c0 [Touchkey] autocal Enabled

[ 2.475415] c0 max77686_rtc_read_time: 117/7/23 11:17:0(3)

[ 2.475475] c0 max77686-rtc max77686-rtc: setting system clock to 2017-08-23 11:17:00 UTC (1503487020)

[ 2.475636] c0 ctrl->mem.size = 0x3d00000

[ 2.475662] c0 ctrl->mem.base = 0x6c300000

[ 2.476192] c0 FIMC0 registered successfully

[ 2.476344] c0 ctrl->mem.size = 0xf00000

[ 2.476370] c0 ctrl->mem.base = 0x0

[ 2.476686] c0 FIMC1 registered successfully

[ 2.476825] c0 ctrl->mem.size = 0x0

[ 2.476849] c0 ctrl->mem.base = 0x0

[ 2.477149] c0 FIMC2 registered successfully

[ 2.477292] c0 ctrl->mem.size = 0x0

[ 2.477316] c0 ctrl->mem.base = 0xffffffea

[ 2.477614] c0 FIMC3 registered successfully

[ 2.477933] c0 S5P TVOUT Driver v3.0 (c) 2010 Samsung Electronics

[ 2.502509] c0 samsung_battery_probe: battery init

[ 2.502541] c0 samsung_battery_probe: Charger name: max77693-charger

[ 2.502577] c0 samsung_battery_probe: Fuelgauge name: max17047-fuelgauge

[ 2.502619] c0 samsung_battery_probe: Temperature source: ap adc

[ 2.502652] c0 samsung_battery_probe: VF detect source: charger irq

[ 2.502687] c0 samsung_battery_probe: Recharge voltage: 4300000

[ 2.502719] c0 samsung_battery_probe: not applied CTIA spec

[ 2.503253] c0 samsung_battery_probe: boot with charging, s(1)

[ 2.504305] c0 samsung_battery_probe: do not support battery gpio detect

[ 2.505081] c1 battery_create_attrs

[ 2.505204] c1 battery_create_attrs: factory attrs created

[ 2.505237] c1 battery_create_attrs: not support CTIA spec

[ 2.505268] c1 samsung_battery_probe: probe complete

[ 2.506509] c1 Freeing init memory: 232K

[ 2.508704] c2 init: init started!

[ 2.513637] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 2.513939] c2 SELinux: 2048 avtab hash slots, 5375 rules.

[ 2.516828] c2 SELinux: 2048 avtab hash slots, 5375 rules.

[ 2.516874] c2 SELinux: 1 users, 2 roles, 577 types, 0 bools, 1 sens, 1024 cats

[ 2.516921] c2 SELinux: 87 classes, 5375 rules

[ 2.517067] c0 battery_interval_calulation: now in booting, set 1s

[ 2.517120] c0 [1] bat: s(62, 6121), v(3954, 39), t(34.1), cs(1, 1), cb(3), cr(466, 460), t(1)

[ 2.518570] c2 SELinux: Completing initialization.

[ 2.518600] c2 SELinux: Setting up existing superblocks.

[ 2.518649] c2 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[ 2.518702] c2 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts

[ 2.518799] c2 SELinux: initialized (dev bdev, type bdev), not configured for labeling

[ 2.518854] c2 SELinux: initialized (dev proc, type proc), uses genfs_contexts

[ 2.518914] c2 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 2.518975] c2 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts

[ 2.519535] c2 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs

[ 2.519584] c2 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs

[ 2.519629] c2 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling

[ 2.519687] c2 SELinux: initialized (dev devpts, type devpts), uses transition SIDs

[ 2.519746] c2 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts

[ 2.519856] c2 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 2.519918] c2 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts

[ 2.765968] c3 type=1403 audit(1503487020.785:2): policy loaded auid=4294967295 ses=4294967295

[ 2.766503] c3 type=1404 audit(1503487020.785:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295

[ 2.900247] c3 init: (Initializing SELinux enforcing took 0.39s.)

[ 2.910516] c0 init: init second stage started!

[ 2.974321] c0 init: waitpid failed: No child processes

[ 2.978707] c0 init: (Loading properties from /default.prop took 0.00s.)

[ 2.981424] c0 init: (Parsing /init.environ.rc took 0.00s.)

[ 2.981893] c0 init: (Parsing /init.usb.rc took 0.00s.)

[ 2.983568] c0 init: (Parsing /init.target.rc took 0.00s.)

[ 2.983985] c0 init: (Parsing /init.smdk4x12.usb.rc took 0.00s.)

[ 2.984040] c0 init: (Parsing /init.smdk4x12.rc took 0.00s.)

[ 2.984737] c0 init: (Parsing /init.usb.configfs.rc took 0.00s.)

[ 2.984874] c0 init: (Parsing /init.zygote32.rc took 0.00s.)

[ 2.985095] c0 init: (Parsing /init.trace.rc took 0.00s.)

[ 2.985806] c0 init: (Parsing /init.cm.rc took 0.00s.)

[ 2.985857] c0 init: (Parsing /init.rc took 0.01s.)

[ 2.986263] c0 init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.

[ 2.994786] c0 init: Starting service 'ueventd'...

[ 2.995481] c0 init: Waiting for /dev/.coldboot_done...

[ 2.997024] c2 ueventd: ueventd started!

[ 2.997956] c2 ueventd: invalid gid 'm2m'

[ 3.000550] c2 ueventd: invalid gid 'm2m'

[ 3.004513] c2 ueventd: invalid gid 'm2m'

[ 3.124648] c1 max17047_get_soc: SOC(62, 6092 / 9821)

[ 3.255087] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0

[ 3.255366] c0 exynos4_handler_tmu_state: inform to init state to platform.

[ 3.463797] c1 ueventd: Coldboot took 0.45s.

[ 3.470340] c0 init: Waiting for /dev/.coldboot_done took 0.47s.

[ 3.470513] c0 init: /dev/hw_random not found

[ 3.473572] c0 keychord: using input dev max77693-muic for fevent

[ 3.473642] c0 keychord: using input dev gpio-keys for fevent

[ 3.473704] c0 keychord: using input dev sii9234_rcp for fevent

[ 3.473771] c0 keychord: using input dev Midas_WM1811 Midas Jack for fevent

[ 3.534548] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 3.536841] c0 battery_interval_calulation: now in booting, set 1s

[ 3.536921] c0 [2] bat: s(62, 0), v(3986, 71), t(34.7), cs(1, 1), cb(3), cr(466, 460), t(2)

[ 3.560812] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 3.561673] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 3.685269] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 3.687347] c0 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs

[ 3.692119] c0 init: write_file: Unable to open '/proc/sys/kernel/sched_compat_yield': No such file or directory

[ 3.693009] c0 init: write_file: Unable to open '/proc/sys/net/ipv4/fwmark_reflect': No such file or directory

[ 3.693223] c0 init: write_file: Unable to open '/proc/sys/net/ipv6/fwmark_reflect': No such file or directory

[ 3.693412] c0 init: write_file: Unable to open '/proc/sys/net/ipv4/tcp_fwmark_accept': No such file or directory

[ 3.765205] c0 SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts

[ 3.765495] c0 init: write_file: Unable to write to '/dev/cpuctl/cpu.shares': Invalid argument

[ 3.769479] c0 init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory

[ 3.773006] c0 init: /dev/hw_random not found

[ 3.778604] c1 fs_mgr: Warning: unknown flag noemulatesd

[ 3.791931] c1 EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic

[ 3.792100] c1 SELinux: initialized (dev mmcblk0p3, type ext4), uses xattr

[ 3.792366] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p3,target=/efs,type=ext4)=0

[ 3.799425] c1 EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)

[ 3.799538] c1 SELinux: initialized (dev mmcblk0p9, type ext4), uses xattr

[ 3.799712] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p9,target=/system,type=ext4)=0

[ 3.800686] c1 F2FS-fs (mmcblk0p8): Magic Mismatch, valid(0xf2f52010) - read(0x10000)

[ 3.800786] c1 F2FS-fs (mmcblk0p8): Can't find valid F2FS filesystem in 1th superblock

[ 3.807804] c1 F2FS-fs (mmcblk0p8): Magic Mismatch, valid(0xf2f52010) - read(0x0)

[ 3.807892] c1 F2FS-fs (mmcblk0p8): Can't find valid F2FS filesystem in 2th superblock

[ 3.885133] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p8,target=/cache,type=f2fs)=-1

[ 3.895243] c1 EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: journal_async_commit,errors=panic

[ 3.895441] c1 SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr

[ 3.895698] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p8,target=/cache,type=ext4)=0

[ 3.895856] c1 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p8 on /cache with fs_type=ext4 instead of f2fs

[ 3.909859] c1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: journal_async_commit

[ 3.910071] c1 SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr

[ 3.910251] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p10,target=/preload,type=ext4)=0

[ 3.921304] c1 F2FS-fs (mmcblk0p12): Magic Mismatch, valid(0xf2f52010) - read(0xb88c0)

[ 3.921439] c1 F2FS-fs (mmcblk0p12): Can't find valid F2FS filesystem in 1th superblock

[ 3.928598] c1 F2FS-fs (mmcblk0p12): Magic Mismatch, valid(0xf2f52010) - read(0x100000)

[ 3.928735] c1 F2FS-fs (mmcblk0p12): Can't find valid F2FS filesystem in 2th superblock

[ 4.000149] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p12,target=/data,type=f2fs)=-1

[ 4.013478] c1 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro

[ 4.013704] c1 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr

[ 4.014014] c1 fs_mgr: check_fs(): mount(/dev/block/mmcblk0p12,/data,ext4)=0: Success

[ 4.080110] c1 fs_mgr: check_fs(): unmount(/data) succeeded

[ 4.085767] c1 fs_mgr: Running /system/bin/e2fsck on /dev/block/mmcblk0p12

[ 4.220091] c0 max77693-muic max77693-muic: func:max77693_muic_init_detect

[ 4.220801] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev CONTROL1:0

[ 4.221596] c0 max77693-muic max77693-muic: func:max77693_muic_detect_dev irq:-1 ret:0

[ 4.221705] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: STATUS1:0x3f, 2:0x41

[ 4.221829] c0 max77693-muic max77693-muic: adc:1f adcerr:0 chgtyp:1 vb:40 dxovp:0 cable_type:17

[ 4.221954] c0 max77693-muic max77693-muic: max77693_muic_detect_dev: ATTACHED

[ 4.222053] c0 max77693-muic max77693-muic: func:max77693_muic_handle_attach st1:3f st2:41 cable_type:17

[ 4.222187] c0 max77693-muic max77693-muic: func:max77693_muic_attach_usb_type adc:1f cable_type:17

[ 4.222305] c0 max77693-muic max77693-muic: max77693_muic_attach_usb_type:USB

[ 4.222402] c0 max77693-muic max77693-muic: func:max77693_muic_set_charging_type force_disable:0

[ 4.222524] c0 max77693_muic_charger_cb: 1

[ 4.222587] c0 melfas-ts 3-0048: melfas_ta_cb

[ 4.222650] c0 melfas-ts 3-0048: TA connect!!!

[ 4.222865] c0 max77693-muic max77693-muic: func:max77693_muic_set_usb_path path:0

[ 4.222967] c0 MUIC safeout path=0

[ 4.223053] c0 regulator regulator.2: func:max77693_reg_is_enabled

[ 4.223140] c0 regulator regulator.2: func:max77693_get_rid

[ 4.223219] c0 regulator regulator.2: func:max77693_get_enable_register

[ 4.223886] c0 regulator regulator.3: func:max77693_reg_is_enabled

[ 4.223976] c0 regulator regulator.3: func:max77693_get_rid

[ 4.224056] c0 regulator regulator.3: func:max77693_get_enable_register

[ 4.224714] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: AP_USB_MODE

[ 4.224822] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: Set manual path

[ 4.227490] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: CNTL1(0x09)

[ 4.228157] c0 max77693-muic max77693-muic: max77693_muic_set_usb_path: CNTL2(0x3e)

[ 4.255097] c0 notify_change_of_tmu_state: uevent: 0, name = TMUSTATE=0

[ 4.255676] c0 normal: free cpufreq_limit & interrupt enable.

[ 4.258115] c1 e2fsck: e2fsck 1.42.9 (28-Dec-2013)

[ 4.258183] c1

[ 4.258349] c1 e2fsck: /dev/block/mmcblk0p12: clean, 966/755904 files, 157062/3022844 blocks

[ 4.258462] c1

[ 4.263162] c1 EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,journal_async_commit,errors=panic

[ 4.263360] c1 SELinux: initialized (dev mmcblk0p12, type ext4), uses xattr

[ 4.263631] c1 fs_mgr: __mount(source=/dev/block/mmcblk0p12,target=/data,type=ext4)=0

[ 4.263779] c1 fs_mgr: mount_with_alternatives(): Mounted /dev/block/mmcblk0p12 on /data with fs_type=ext4 instead of f2fs

[ 4.275647] c0 fs_mgr: Warning: unknown flag noemulatesd

[ 4.282281] c0 zram0: detected capacity change from 0 to 419430400

[ 4.360564] c0 Adding 409596k swap on /dev/block/zram0. Priority:-1 extents:1 across:409596k SS

[ 4.364342] c0 init: Starting service 'logd'...

[ 4.413421] c0 init: (Loading properties from /system/build.prop took 0.03s.)

[ 4.413707] c0 init: (Loading properties from /vendor/build.prop took 0.00s.)

[ 4.414787] c0 init: (Loading properties from /factory/factory.prop took 0.00s.)

[ 4.415413] c0 fs_mgr: Warning: unknown flag noemulatesd

[ 4.424661] c0 init: Starting service 'vold'...

[ 4.428022] c0 init: Not bootcharting.

[ 4.435878] c2 logd.auditd: start

[ 4.435956] c2 logd.klogd: 4435925046

[ 4.551113] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 4.556220] c0 battery_interval_calulation: now in booting, set 1s

[ 4.556286] c0 [3] bat: s(62, 0), v(3990, 75), t(34.2), cs(1, 1), cb(3), cr(466, 460), t(3)

[ 4.576893] c3 fs_mgr: Warning: unknown flag noemulatesd

[ 4.630171] c2 init: Starting service 'exec 0 (/system/bin/tzdatacheck)'...

[ 4.653396] c2 init: Service 'exec 0 (/system/bin/tzdatacheck)' (pid 1936) exited with status 0

[ 4.656017] c2 init: cannot find 'icd_check', disabling 'exec 1 (icd_check)'

[ 4.668861] c2 mdnie mdnie: scenario_store :: value=0

[ 4.668917] c2 mdnie mdnie: mode=1, scenario=0, outdoor=0, cabc=0, CYANOGENMOD

[ 4.669048] c2 mdnie mdnie: mode_store :: value=0

[ 4.669084] c2 mdnie mdnie: mode=0, scenario=0, outdoor=0, cabc=0, CYANOGENMOD

[ 4.675862] c2 init: cannot find 'icd_check', disabling 'exec 2 (icd_check)'

[ 4.694504] c2 init: write_file: Unable to open '/sys/class/sec/gps/GPS_PWR_EN/export': No such file or directory

[ 4.694934] c2 init: SELinux: Could not get canonical path /sys/class/sec/gps/export restorecon: No such file or directory.

[ 4.706547] c2 init: Starting service 'sysinit'...

[ 4.707665] c2 init: (Loading properties from /data/local.prop took 0.00s.)

[ 4.770430] c2 init: Starting service 'logd-reinit'...

[ 4.775968] c2 init: Starting service 'healthd'...

[ 4.777308] c2 init: Starting service 'lmkd'...

[ 4.778760] c2 init: Starting service 'servicemanager'...

[ 4.778839] c1 binder: 1966:1966 transaction failed 29189, size 0-0

[ 4.780453] c2 init: Starting service 'surfaceflinger'...

[ 4.782047] c2 type=1400 audit(1503487022.795:4): avc: denied { mounton } for pid=1 comm="init" path="/sys/kernel/debug" dev=debugfs ino=1 scontext=u:r:init:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=0

[ 4.782347] c2 init: property_set("ro.build.product", "smdk4x12") failed

[ 4.788105] c2 init: property_set("ro.product.device", "smdk4x12") failed

[ 4.806225] c2 init: write_file: Unable to open '/sys/kernel/mm/ksm/deferred_timer': No such file or directory

[ 4.813901] c3 logd.daemon: reinit

[ 4.817185] c0 init: Service 'logd-reinit' (pid 1965) exited with status 0

[ 4.819296] c0 init: SELinux: Could not get canonical path /sys/block/sda/queue/scheduler restorecon: No such file or directory.

[ 4.830890] c3 init: SELinux: Could not get canonical path /sys/block/sde/queue/scheduler restorecon: No such file or directory.

[ 4.841379] c3 init: SELinux: Could not get canonical path /sys/block/dm-0/queue/scheduler restorecon: No such file or directory.

[ 4.853619] c2 failed to copy MFC F/W during init

[ 4.855699] c3 init: write_file: Unable to open '/proc/sys/kernel/perf_event_paranoid': No such file or directory

[ 4.855827] c3 init: Starting service 'console'...

[ 4.857431] c3 init: Starting service 'netd'...

[ 4.858558] c3 init: Starting service 'debuggerd'...

[ 4.862386] c3 init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'

[ 4.869529] c3 init: Starting service 'ril-daemon'...

[ 4.871133] c3 init: Starting service 'drm'...

[ 4.885171] c3 init: Starting service 'media'...

[ 4.886484] c3 init: Starting service 'installd'...

[ 4.887604] c3 init: Starting service 'keystore'...

[ 4.888697] c3 init: Starting service 'zygote'...

[ 4.889755] c3 init: Starting service 'gatekeeperd'...

[ 4.935413] c3 init: Starting service 'perfprofd'...

[ 4.937003] c3 init: Starting service 'macloader'...

[ 4.937913] c3 init: Starting service 'bootsnd'...

[ 4.938880] c3 init: Starting service 'su_daemon'...

[ 4.939734] c3 usb: enable_store enabled=0, !dev->enabled=1

[ 4.939765] c3 usb: usb_gadget_disconnect

[ 4.939938] c3 usb: functions_store buff=mtp,adb

[ 4.939968] c3 usb: android_enable_function name=mtp

[ 4.939997] c3 usb: android_enable_function name=adb

[ 4.945203] c3 usb: enable_store enabled=1, !dev->enabled=1

[ 4.945244] c3 usb: enable_store vendor=4e8,product=6860,bcdDevice=226

[ 4.945286] c3 ,Class=0,SubClass=0,Protocol=0

[ 4.945314] c3 usb: enable_store next cmd : usb_add_config

[ 4.945484] c3 init: Starting service 'adbd'...

[ 4.965324] c2 adb_open

[ 4.965347] c2 usb: android_bind_enabled_functions f:mtp

[ 4.965378] c2 mtp_bind_config

[ 4.965400] c2 usb: usb_string_id cdev(0xeb9bf540)->next_string_id=1

[ 4.965464] c2 usb: android_bind_enabled_functions f:adb

[ 4.965494] c2 adb_bind_config

[ 4.965520] c2 usb: usb_gadget_connect

[ 4.997657] c3 init: Service 'macloader' (pid 1994) exited with status 0

[ 5.001884] c1 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 5.001935] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[ 5.002080] c1 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 5.002117] c1 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[ 5.002219] c1 audss_reg_restore: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 5.002259] c1 audss_clk_enable(1): SRC[0x1], DIV[0xf10], GATE[0x1c7]

[ 5.002357] c1 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params ++

[ 5.002412] c1 wm8994-codec wm8994-codec: write 302 = 4000

[ 5.002459] c2 init: Service 'sysinit' (pid 1962) exited with status 0

[ 5.002634] c1 wm8994-codec wm8994-codec: _wm8994_set_fll ++

[ 5.002673] c1 wm8994-codec wm8994-codec: write 221 = 700

[ 5.002946] c1 wm8994-codec wm8994-codec: write 222 = 86c2

[ 5.003136] c1 wm8994-codec wm8994-codec: write 223 = e0

[ 5.005122] c2 wm8994-codec wm8994-codec: write 224 = c88

[ 5.006220] c2 wm8994-codec wm8994-codec: write 220 = 5

[ 5.015086] c2 wm8994-codec wm8994-codec: _wm8994_set_fll --

[ 5.015126] c2 wm8994-codec wm8994-codec: write 200 = 11

[ 5.015325] c2 wm8994-codec wm8994-codec: write d0 = cc00

[ 5.015529] c2 wm8994-codec wm8994-codec: write 210 = 83

[ 5.015718] c2 wm8994-codec wm8994-codec: write 211 = 83

[ 5.015900] c2 wm8994-codec wm8994-codec: midas_wm1811_aif1_hw_params --

[ 5.015941] c2 wm8994-codec wm8994-codec: write 300 = 4010

[ 5.016119] c2 wm8994-codec wm8994-codec: write 303 = 70

[ 5.016298] c2 wm8994-codec wm8994-codec: write 305 = 20

[ 5.016476] c2 wm8994-codec wm8994-codec: write 210 = 73

[ 5.016879] c2 I:P:DmaAddr=@2058000 Total=14080 PrdSz=3520 #Prds=4 dma_area=0xf4270000

[ 5.017816] c2 wm8994-codec wm8994-codec: write 420 = 0

[ 5.018301] c2 i2s_txctrl:Turn on

[ 5.096797] c0 i2s_txctrl: Turn Off - spr is no active

[ 5.145641] c2 i2s_txctrl:Turn on

[ 5.237130] c3 mif: misc_open: iod = umts_boot0

[ 5.240238] c3 mif: usb_init_communication: 1977:rild

[ 5.240477] c3 store_ehci_power: EHCI turns off

[ 5.240507] c3 s5p-ehci s5p-ehci: remove, state 4

[ 5.240561] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[ 5.240601] c3 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[ 5.270264] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered

[ 5.275460] c3 s5p-ehci s5p-ehci: still being used(4)

[ 5.275490] c3 CP not ready, Active State low

[ 5.307827] c1 s3c-fimc3: FIMC3 1 opened.

[ 5.311703] c1 init: Starting service 'bootanim'...

[ 5.325734] c3 store_ohci_power: OHCI turns off

[ 5.325775] c3 s5p-ohci s5p-ohci: host_phy_resume

[ 5.350067] c3 s5p-ohci s5p-ohci: remove, state 4

[ 5.350128] c3 usb usb2: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[ 5.350170] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[ 5.406822] c3 s5p-ohci s5p-ohci: USB bus 2 deregistered

[ 5.407139] c3 s5p-ohci s5p-ohci: usb host phy off

[ 5.457354] c3 mif: xmm6262_on:

[ 5.569858] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 5.600136] c0 battery_interval_calulation: now in booting, set 1s

[ 5.600193] c0 [4] bat: s(62, 0), v(3874, -40), t(34.4), cs(1, 1), cb(3), cr(466, 460), t(4)

[ 5.665222] c3 store_ehci_power: EHCI turns on

[ 5.665274] c3 mif: set_hsic_lpa_states: 309: called(s5p_usb_phy_init+0x138/0x324):

[ 5.665319] c3 [MODEM_IF]Slave Wake

[ 5.665346] c3 mif: set hsic lpa phy init: slave wake-up (1)

[ 5.665380] c3 s5p-ehci s5p-ehci: usb phy usage(2)

[ 5.665584] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[ 5.665630] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[ 5.665668] c3 s5p-ehci s5p-ehci: S5P EHCI Host Controller

[ 5.666456] c3 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[ 5.666673] c3 migrating range 72284 72285, retry (0)

[ 5.678211] c3 migrating range 72285 72286, retry (0)

[ 5.690201] c3 migrating range 72286 72287, retry (0)

[ 5.701673] c3 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000

[ 5.706793] c1 s3c-fimc0: FIMC0 1 opened.

[ 5.707261] c1 s5c73m3_probe

[ 5.707700] c1 s5c73m3_power_on: in

[ 5.707755] c1 failed open file. :: -13

[ 5.710064] c3 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[ 5.710168] c3 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 5.710205] c1 s5c73m3 vddCore : 1150000

[ 5.710231] c3 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 5.710284] c3 usb usb1: Product: S5P EHCI Host Controller

[ 5.710319] c3 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd

[ 5.710355] c3 usb usb1: SerialNumber: s5p-ehci

[ 5.710383] c3 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[ 5.711970] c3 hub 1-0:1.0: USB hub found

[ 5.712013] c3 hub 1-0:1.0: 3 ports detected

[ 5.720198] c3 mif: Active States =1, s5p-ehci

[ 5.773421] c3 store_ohci_power: OHCI turns on

[ 5.773458] c3 s5p-ohci s5p-ohci: usb phy usage(6)

[ 5.773483] c3 s5p-ohci s5p-ohci: Already power on PHY

[ 5.779804] c1 healthd: wakealarm_init: timerfd_create failed

[ 5.780287] c3 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[ 5.780330] c3 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[ 5.780369] c3 s5p-ohci s5p-ohci: s5p OHCI

[ 5.781559] c3 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON

[ 5.781676] c3 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[ 5.784169] c3 migrating range 72287 72288, retry (0)

[ 5.796077] c3 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000

[ 5.798138] c1 healthd: battery [l=62 v=3874 t=34.4 h=2 st=2] c=0 chg=u 2017-08-23 11:17:03.816606711 UTC

[ 5.802813] c3 s5c73m3_read_vdd_core: read_val 0x8aa

[ 5.805295] c0 s5c73m3_set_vdd_core : 1100000

[ 5.808454] c0 s5c73m3_init: vdd core value from OTP : 1.10V

[ 5.808485] c0 s5c73m3_init: chip info from OTP : 0x6244, 0x7704, 0xa376

[ 5.822654] c0 s5c73m3_get_sensor_fw_version: Sensor_version = BHFJ02, Sensor_Type = CML0801-M0

[ 5.825538] c0 s5c73m3_get_af_cal_version: Cal_Device = 0xb2b0cd4a, Cal_DLL = 0x48499ef7

[ 5.830659] c0 s5c73m3_check_fw_date: Sensor_date = FJ02, Phone_date = FJ02

[ 5.830694] c0 , compare result = 0

[ 5.830719] c0 s5c73m3_check_fw: Loading From FROM......

[ 5.854117] c0 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 5.854154] c0 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 5.854190] c0 usb usb2: Product: s5p OHCI

[ 5.854214] c0 usb usb2: Manufacturer: Linux 3.0.101-replicant ohci_hcd

[ 5.854247] c0 usb usb2: SerialNumber: s5p-ohci

[ 5.854273] c0 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[ 5.856847] c0 hub 2-0:1.0: USB hub found

[ 5.856898] c0 hub 2-0:1.0: 3 ports detected

[ 5.907931] c0 mif: link_pm_ioctl: 6f33

[ 5.958055] c0 mif: link_pm_ioctl: 6f33

[ 6.008184] c0 mif: link_pm_ioctl: 6f33

[ 6.020066] c2 usb 1-2: new high speed USB device number 2 using s5p-ehci

[ 6.058313] c0 mif: link_pm_ioctl: 6f33

[ 6.108611] c0 mif: link_pm_ioctl: 6f33

[ 6.151504] c2 usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11

[ 6.151563] c2 usb 1-2: New USB device found, idVendor=058b, idProduct=0041

[ 6.151600] c2 usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 6.151637] c2 call_battery_notify : VID : 0x58b, PID : 0x41 no action.

[ 6.152662] c2 mif: if_usb_probe: usbdev = 0xebaa6400

[ 6.152694] c2 mif: if_usb_set_pipe: set 0

[ 6.152718] c2 mif: if_usb_probe: devdata usbdev = 0xebaa6400

[ 6.152827] c2 mif: if_usb_probe: successfully done

[ 6.158733] c0 mif: link_pm_ioctl: 6f33

[ 6.239977] c0 s5c73m3_set_flash: E, value 1

[ 6.245538] c0 s5c73m3_s_ctrl: id 37, value 90

[ 6.245566] c0 s5c73m3_set_jpeg_quality: E, value 90

[ 6.247308] c0 s5c73m3_s_ctrl: id 131, value 213911952

[ 6.247350] c0 s5c73m3_s_ctrl: id 90, value 0

[ 6.247374] c0 s5c73m3_set_zoom: E, value 0

[ 6.248986] c0 s5c73m3_s_ctrl: id 70, value 1

[ 6.249011] c0 s5c73m3_set_scene_mode: E, value 1

[ 6.251128] c0 s5c73m3_s_ctrl: id 71, value 1

[ 6.251156] c0 s5c73m3_set_flash: E, value 1

[ 6.255153] c0 s5c73m3_s_ctrl: id 95, value 0

[ 6.255188] c0 s5c73m3_s_ctrl: id 99, value 0

[ 6.255213] c0 s5c73m3_set_af_mode: E, value 0

[ 6.256945] c0 s5c73m3_s_ctrl: id 72, value 0

[ 6.256970] c0 s5c73m3_set_exposure: E, value 0

[ 6.258569] c0 s5c73m3_s_ctrl: id 105, value 0

[ 6.260176] c0 s5c73m3_s_ctrl: id 73, value 1

[ 6.260200] c0 s5c73m3_set_whitebalance: E, value 1

[ 6.261893] c0 s5c73m3_s_ctrl: id 74, value 1

[ 6.261920] c0 s5c73m3_set_effect: E, value 1

[ 6.263663] c0 s5c73m3_s_ctrl: id 75, value 0

[ 6.263691] c0 s5c73m3_set_iso: E, value 0

[ 6.265803] c0 s5c73m3_s_ctrl: id 81, value 0

[ 6.265831] c0 s5c73m3_set_antishake: E, value 0

[ 6.274120] c0 s5c73m3_power_down: in

[ 6.302868] c2 migrating range 72288 72289, retry (0)

[ 6.321564] c0 s3c_csis_power: vmipi_1.8v is on. so OFF

[ 6.321922] c0 s3c_csis_power: vmipi_1.1v is on. so OFF

[ 6.322083] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF

[ 6.322255] c0 fimc_runtime_suspend_cap FIMC0

[ 6.322281] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.

[ 6.328784] c0 s3c-fimc0: FIMC0 0 released.

[ 6.329772] c0 s3c-fimc0: FIMC0 1 opened.

[ 6.329880] c0 flite_runtime_resume

[ 6.329904] c0 flite_runtime_resume--

[ 6.330347] c0 s5k6a3_power_on: in

[ 6.331891] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were ON

[ 6.332942] c0 fimc_is_s_power++ 1

[ 6.333328] c0 FIMC_IS runtime resume

[ 6.333391] c0 FIMC_IS runtime resume end

[ 6.333414] c0 fimc_is_s_power --

[ 6.336359] c3 exynos4-fimc-is exynos4-fimc-is: could not load firmware (err=-2)

[ 6.342633] c3 fimc_is_load_fw:329: failed to fimc_is_request_firmware (-22)

[ 6.342669] c3

[ 6.351205] c3 s3c-fimc0: FIMC-IS init load_fw failed

[ 6.356128] c3 flite_runtime_suspend

[ 6.356157] c3 flite_runtime_suspend--

[ 6.356184] c3 s5k6a3_power_down: in

[ 6.358573] c0 s3c_csis_power: vmipi_1.8v is on. so OFF

[ 6.358745] c0 s3c_csis_power: vmipi_1.1v is on. so OFF

[ 6.358774] c0 s3c_csis_power: vmipi_1.0v and vmipi_1.8v were OFF

[ 6.358809] c0 fimc_is_s_power++ 0

[ 6.358828] c0 fimc_is_s_power sub ip power off ++

[ 6.358855] c0 fimc_is_s_power Sub ip is alive

[ 6.358881] c0 fimc_is_s_power Wait Sub ip power off

[ 6.364160] c2 migrating range 72289 7228a, retry (0)

[ 6.394369] c3 migrating range 7228a 7228b, retry (0)

[ 6.425294] c3 migrating range 7228b 7228c, retry (0)

[ 6.459340] c2 migrating range 7228c 7228d, retry (0)

[ 6.489930] c2 migrating range 7228d 7228e, retry (0)

[ 6.516958] c2 migrating range 7228e 7228f, retry (0)

[ 6.619605] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 6.621845] c0 battery_interval_calulation: now in booting, set 1s

[ 6.621887] c0 [5] bat: s(62, 0), v(3887, -27), t(33.7), cs(1, 1), cb(3), cr(466, 460), t(5)

[ 6.623222] c1 healthd: battery [l=62 v=3887 t=33.7 h=2 st=2] c=0 chg=u 2017-08-23 11:17:04.642724627 UTC

[ 6.841952] c0 i2s_txctrl: Turn Off - spr is no active

[ 6.841999] c0 wm8994-codec wm8994-codec: write 420 = 200

[ 6.842204] c0 audss_reg_save: SRC[0x1], DIV[0xf10], GATE[0x42]

[ 6.842237] c0 audss_clk_enable(0): SRC[0x1], DIV[0xf10], GATE[0x42]

[ 6.843066] c1 init: Service 'bootsnd' (pid 1995) exited with status 0

[ 7.230803] c3 mif: usb_rx_complete: urb err status = -71

[ 7.286440] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0

[ 7.286502] c0 mif: phone_active_irq_handler: PA EVENT : reset =1, pa=1, cp_dump=0

[ 7.396884] c3 mif: link_pm_ioctl: 6f32

[ 7.447018] c3 mif: link_pm_ioctl: 6f32

[ 7.497145] c3 mif: link_pm_ioctl: 6f32

[ 7.547271] c3 mif: link_pm_ioctl: 6f32

[ 7.597409] c3 mif: link_pm_ioctl: 6f32

[ 7.633957] c0 max17047_get_soc: SOC(62, 6092 / 9821)

[ 7.636165] c0 battery_interval_calulation: v diff(19375), weight(120)

[ 7.636198] c0 battery_interval_calulation: weight(120)

[ 7.636226] c0 battery_monitor_interval: apply weight(120), 30 -> 36

[ 7.636268] c0 [6] bat: s(62, 0), v(3934, 19), t(34.9), cs(1, 1), cb(3), cr(466, 460), t(6)

[ 7.637431] c1 healthd: battery [l=62 v=3934 t=34.9 h=2 st=2] c=0 chg=u 2017-08-23 11:17:05.656939670 UTC

[ 7.647546] c3 mif: link_pm_ioctl: 6f32

[ 7.697684] c3 mif: link_pm_ioctl: 6f32

[ 7.747827] c3 mif: link_pm_ioctl: 6f32

[ 7.797950] c3 mif: link_pm_ioctl: 6f32

[ 7.848083] c3 mif: link_pm_ioctl: 6f32

[ 7.898258] c3 mif: link_pm_ioctl: 6f30

[ 7.898395] c3 store_ehci_power: EHCI turns off

[ 7.898427] c3 s5p-ehci s5p-ehci: remove, state 1

[ 7.898485] c3 usb usb1: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[ 7.898523] c3 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[ 7.898560] c3 usb 1-2: USB disconnect, device number 2 by usb_disconnect+0xa0/0x15c

[ 7.898598] c3 call_battery_notify : VID : 0x58b, PID : 0x41 set 1700mA.

[ 7.898710] c3 mif: if_usb_disconnect:

[ 7.898733] c3 mif: if_usb_disconnect: put dev 0xebaa6400

[ 7.899096] c3 mif: if_usb_disconnect:

[ 7.915780] c3 s5p-ehci s5p-ehci: USB bus 1 deregistered

[ 7.916153] c3 s5p-ehci s5p-ehci: still being used(4)

[ 7.916187] c3 mif: Active States =0, s5p-ehci

[ 7.969401] c3 store_ohci_power: OHCI turns off

[ 7.969438] c3 s5p-ohci s5p-ohci: remove, state 1

[ 7.969492] c3 usb usb2: USB disconnect, device number 1 by usb_remove_hcd+0xb0/0x150

[ 7.969532] c3 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[ 8.001364] c2 s5p-ohci s5p-ohci: USB bus 2 deregistered

[ 8.001677] c2 s5p-ohci s5p-ohci: usb host phy off

[ 8.051831] c2 mif: link_pm_ioctl: 6f31

[ 8.051862] c2 mif: link_pm_ioctl: 6f32

[ 8.101989] c2 mif: link_pm_ioctl: 6f32

[ 8.152127] c2 mif: link_pm_ioctl: 6f32

[ 8.202242] c2 mif: link_pm_ioctl: 6f32

[ 8.202299] c2 mif: link_pm_ioctl: 6f30

[ 8.202397] c2 store_ehci_power: EHCI turns on

[ 8.202436] c2 mif: set_hsic_lpa_states: 309: called(s5p_usb_phy_init+0x138/0x324):

[ 8.202473] c2 mif: set hsic lpa phy init: slave wake-up (1)

[ 8.202501] c2 s5p-ehci s5p-ehci: usb phy usage(2)

[ 8.202673] c2 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[ 8.202716] c2 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[ 8.202749] c2 s5p-ehci s5p-ehci: S5P EHCI Host Controller

[ 8.203175] c2 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1

[ 8.203540] c2 migrating range 72284 72285, retry (0)

[ 8.213193] c2 migrating range 72285 72286, retry (0)

[ 8.222856] c2 migrating range 72286 72287, retry (0)

[ 8.234076] c2 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000

[ 8.240054] c2 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00

[ 8.240171] c2 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 8.240217] c2 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 8.240261] c2 usb usb1: Product: S5P EHCI Host Controller

[ 8.240295] c2 usb usb1: Manufacturer: Linux 3.0.101-replicant ehci_hcd

[ 8.240336] c2 usb usb1: SerialNumber: s5p-ehci

[ 8.240364] c2 call_battery_notify : VID : 0x1d6b, PID : 0x2 skipped.

[ 8.242568] c2 hub 1-0:1.0: USB hub found

[ 8.242609] c2 hub 1-0:1.0: 3 ports detected

[ 8.243299] c2 mif: Active States =1, s5p-ehci

[ 8.297552] c2 store_ohci_power: OHCI turns on

[ 8.297589] c2 s5p-ohci s5p-ohci: usb phy usage(6)

[ 8.297617] c2 s5p-ohci s5p-ohci: Already power on PHY

[ 8.301388] c2 usb: set_exynos_usb_phy_tune old phy1 tune=0x2831b3 t=1

[ 8.301441] c2 usb: set_exynos_usb_phy_tune new phy1 tune=0x2831b3

[ 8.301482] c2 s5p-ohci s5p-ohci: s5p OHCI

[ 8.302555] c2 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2

[ 8.303164] c2 migrating range 72287 72288, retry (0)

[ 8.314337] c2 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000

[ 8.369168] c2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 8.369213] c2 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 8.369254] c2 usb usb2: Product: s5p OHCI

[ 8.369279] c2 usb usb2: Manufacturer: Linux 3.0.101-replicant ohci_hcd

[ 8.369316] c2 usb usb2: SerialNumber: s5p-ohci

[ 8.369344] c2 call_battery_notify : VID : 0x1d6b, PID : 0x1 skipped.

[ 8.371174] c1 hub 2-0:1.0: USB hub found

[ 8.371211] c1 hub 2-0:1.0: 3 ports detected

[ 8.421701] c1 mif: link_pm_ioctl: 6f31

[ 8.421732] c1 mif: link_pm_ioctl: 6f33

[ 8.471851] c1 mif: link_pm_ioctl: 6f33

[ 8.521991] c1 mif: link_pm_ioctl: 6f33

[ 8.550114] c2 usb 1-2: new high speed USB device number 2 using s5p-ehci

[ 8.572120] c1 mif: link_pm_ioctl: 6f33

[ 8.622249] c1 mif: link_pm_ioctl: 6f33

[ 8.672389] c1 mif: link_pm_ioctl: 6f33

[ 8.689029] c3 usb 1-2: New USB device found, idVendor=1519, idProduct=0020

[ 8.689064] c3 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 8.689104] c3 usb 1-2: Product: HSIC Device

[ 8.689130] c3 usb 1-2: Manufacturer: Comneon

[ 8.689156] c3 usb 1-2: SerialNumber: 0123456789

[ 8.689182] c3 call_battery_notify : VID : 0x1519, PID : 0x20 skipped.

[ 8.705597] c3 mif: if_usb_probe: usbdev = 0xebaa6400

[ 8.705648] c3 mif: if_usb_set_pipe: set 0

[ 8.705686] c3 mif: if_usb_probe: devdata usbdev = 0xebaa6400

[ 8.705868] c3 mif: if_usb_probe: successfully done

[ 8.712009] c3 mif: if_usb_probe: usbdev = 0xebaa6400

[ 8.712047] c3 mif: if_usb_set_pipe: set 1

[ 8.712072] c3 mif: if_usb_probe: devdata usbdev = 0xebaa6400

[ 8.712172] c3 mif: if_usb_probe: successfully done

[ 8.713971] c3 mif: if_usb_probe: usbdev = 0xebaa6400

[ 8.714004] c3 mif: if_usb_set_pipe: set 2

[ 8.714027] c3 mif: if_usb_probe: devdata usbdev = 0xebaa6400

[ 8.714124] c3 mif: if_usb_probe: successfully done

[ 8.716298] c3 mif: if_usb_probe: usbdev = 0xebaa6400

[ 8.716336] c3 mif: if_usb_set_pipe: set 3

[ 8.716363] c3 mif: if_usb_probe: devdata usbdev = 0xebaa6400

[ 8.716519] c3 mif: link_pm_change_modem_state: set modem state 4 by if_usb_probe+0x46c/0x4b4

[ 8.723651] c3 mif: io_dev_modem_state_changed: xmm6262 state changed (BOOTING -> ONLINE)

[ 8.725133] c0 mif: link_pm_ioctl: 6f33

[ 8.732409] c3 mif: if_usb_probe: successfully done

[ 8.775258] c0 mif: link_pm_ioctl: 6f33

[ 9.093872] c0 mif: misc_release: iod = umts_boot0

[ 9.097434] c0 mif: misc_open: iod = umts_ipc0

[ 9.101657] c0 mif: usb_init_communication: 1977:rild

[ 9.101684] c0 mif: start_ipc: send 'a'

[ 9.105722] c0 mif: misc_open: iod = umts_rfs0

[ 9.107497] c3 mif: IPC-RX(40): 7f 0a 00 00 07 00 ff ff 01 01 03 7e 7f 1a 00 00 ...

[ 9.109902] c0 mif: usb_init_communication: 1977:rild

[ 9.109975] c3 mif: IPC-RX(62): 7f 15 00 00 12 00 ff ff 08 05 03 ff 02 01 00 00 ...

[ 9.205063] c3 mif: link_pm_runtime_start: rpm_status: 0

[ 9.205093] c3 mif: link_pm_runtime_start: EHCI runtime s5p-ehci, s5p-ehci

[ 9.256830] c3 mif: IPC-RX(27): 7f 0b 00 00 08 00 ff ff 05 07 03 02 7e 7f 0c 00 ...

[ 9.324957] c3 mif: IPC-RX(60): 7f 3a 00 00 37 00 ff ff 0e 03 01 2e 00 d0 2c 81 ...

[ 9.355057] c0 fimc_is_s_power:412: fimc_is_s_power wait timeout

[ 9.355085] c0

[ 9.361408] c0 Set low poweroff mode

[ 9.361433] c0 fimc_is_s_power sub ip power off --

[ 9.361457] c0 fimc_is_hw_a5_power++ 0

[ 9.361476] c0 fimc_is_hw_a5_power off 1. access PMUREG_ISP_ARM_OPTION

[ 9.361507] c0 fimc_is_hw_a5_power off ?!?! Low power mode (Option 0)

[ 9.361538] c0 fimc_is_hw_a5_power off 2. access PMUREG_ISP_ARM_CONFIGURATION

[ 9.361571] c0 fimc_is_hw_a5_power off 3. check A5 power off status

[ 9.361601] c0 fimc_is_hw_a5_power off 4. complete

[ 9.361624] c0 fimc_is_hw_a5_power --

[ 9.361642] c0 A5 power off

[ 9.361661] c0 FIMC_IS runtime suspend

[ 9.361683] c0 FIMC_IS runtime suspend end

[ 9.361895] c0 fimc_is_s_power --

[ 9.361919] c0 fimc_runtime_suspend_cap FIMC0

[ 9.361941] c0 s3c-fimc0: fimc_runtime_suspend_cap: No capture device.

[ 9.368101] c0 s3c-fimc0: FIMC0 0 released.

[ 9.370472] c0 warning: `main' uses 32-bit capabilities (legacy support in use)

[ 9.532254] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 9.532353] c3 mif: link_pm_runtime_work: rpm_states=3

[ 9.575917] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 9.625145] c3 mif: usb_port_resume: 1283, 4

[ 9.835440] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 9.835496] c3 mif: link_pm_runtime_work: rpm_states=3

[ 9.880740] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 9.930061] c3 mif: usb_port_resume: 1283, 4

[ 10.140148] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 10.140206] c0 mif: link_pm_runtime_work: rpm_states=3

[ 10.185827] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 10.235056] c3 mif: usb_port_resume: 1283, 4

[ 10.445722] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 10.445844] c0 mif: link_pm_runtime_work: rpm_states=3

[ 10.490984] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 10.540089] c0 mif: usb_port_resume: 1283, 4

[ 10.755652] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 10.755862] c0 mif: link_pm_runtime_work: rpm_states=3

[ 10.802173] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 10.850082] c3 mif: usb_port_resume: 1283, 4

[ 11.060794] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 11.060919] c0 mif: link_pm_runtime_work: rpm_states=3

[ 11.105785] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 11.106194] c2 cpufreq_max_limit_store: Unlock request is ignored

[ 11.110952] c2 cpufreq_min_limit_store: Unlock request is ignored

[ 11.117681] c2 request_suspend_state: wakeup (3->0) at 11117664758 (2017-08-23 11:17:09.137212964 UTC)

[ 11.155121] c0 mif: usb_port_resume: 1283, 4

[ 11.205314] c0 lcd panel: brightness=102, bl=9, candela=102

[ 11.365483] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 11.365607] c0 mif: link_pm_runtime_work: rpm_states=3

[ 11.410902] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 11.460164] c0 mif: usb_port_resume: 1283, 4

[ 11.671668] c0 mif: link_pm_irq_handler: gpio [HWK] get [0]

[ 11.671833] c0 mif: link_pm_runtime_work: rpm_states=3

[ 11.716166] c0 mif: link_pm_irq_handler: gpio [HWK] get [1]

[ 11.765059] c0 mif: usb_port_resume: 1283, 4

[ 12.080151] c3 s5p-ehci s5p-ehci: host_phy_susp

[ 14.400915] c1 wm8994-codec wm8994-codec: write 311 = 0

[ 14.406096] c1 wm8994-codec wm8994-codec: write 610 = 1c0

[ 14.407450] c1 wm8994-codec wm8994-codec: write 611 = 1c0

[ 14.411307] c1 wm8994-codec wm8994-codec: write 20 = 179

[ 14.411702] c1 wm8994-codec wm8994-codec: write 21 = 179

[ 14.412290] c1 wm8994-codec wm8994-codec: write 1c = 16d

[ 14.412626] c1 wm8994-codec wm8994-codec: write 1d = 16d

[ 14.414978] c1 wm8994-codec wm8994-codec: write 601 = 1

[ 14.418211] c0 wm8994-codec wm8994-codec: write 602 = 1

[ 14.418683] c0 wm8994-codec wm8994-codec: write 51 = 7

[ 14.422224] c0 wm8994-codec wm8994-codec: write 604 = 10

[ 14.425938] c0 wm8994-codec wm8994-codec: write 605 = 20

[ 14.426351] c0 wm8994-codec wm8994-codec: write 603 = c

[ 14.426684] c0 wm8994-codec wm8994-codec: write 603 = 18c

[ 14.427016] c0 wm8994-codec wm8994-codec: write 612 = 1c0

[ 14.427327] c0 wm8994-codec wm8994-codec: write 613 = 1c0

[ 14.430455] c0 wm8994-codec wm8994-codec: write 36 = 2

[ 14.434803] c0 wm8994-codec wm8994-codec: write 36 = 3

[ 14.439466] c2 wm8994-codec wm8994-codec: write 24 = 19

[ 14.440237] c0 wm8994-codec wm8994-codec: write 22 = 0

[ 14.440643] c0 wm8994-codec wm8994-codec: write 23 = 0

[ 14.443384] c0 wm8994-codec wm8994-codec: write 2d = 1

[ 14.447909] c0 wm8994-codec wm8994-codec: write 2e = 1

[ 14.452440] c0 wm8994-codec wm8994-codec: write 33 = 10

[ 14.457476] c0 wm8994-codec wm8994-codec: write 33 = 18

[ 14.459479] c2 wm8994-codec wm8994-codec: write 1f = 0

[ 14.463470] c2 wm8994-codec wm8994-codec: write 35 = 30

[ 14.465816] c2 wm8994-codec wm8994-codec: write 35 = 31

[ 14.471706] c0 wm8994-codec wm8994-codec: write 34 = 30

[ 14.475151] c1 wm8994-codec wm8994-codec: write 34 = 31

[ 14.479802] c0 wm8994-codec wm8994-codec: write 606 = 2

[ 14.482758] c0 wm8994-codec wm8994-codec: write 607 = 2

[ 14.487453] c0 wm8994-codec wm8994-codec: write 28 = 20

[ 14.490157] c0 wm8994-codec wm8994-codec: write 28 = 30

[ 14.490546] c0 wm8994-codec wm8994-codec: write 29 = 10

[ 14.490851] c0 wm8994-codec wm8994-codec: write 18 = 10b

[ 14.493525] c0 wm8994-codec wm8994-codec: write 28 = 32

[ 14.495952] c0 wm8994-codec wm8994-codec: write 28 = 33

[ 14.496348] c0 wm8994-codec wm8994-codec: write 2a = 10

[ 14.496693] c0 wm8994-codec wm8994-codec: write 1a = 10b

[ 14.499250] c0 wm8994-codec wm8994-codec: write 28 = 3b

[ 14.502142] c0 wm8994-codec wm8994-codec: write 28 = 3f

[ 14.502539] c0 wm8994-codec wm8994-codec: write 2a = 90

[ 14.502860] c0 wm8994-codec wm8994-codec: write 1b = 10b

[ 14.505439] c0 wm8994-codec wm8994-codec: write 28 = bf

[ 14.508490] c0 wm8994-codec wm8994-codec: write 28 = ff

[ 14.508924] c0 wm8994-codec wm8994-codec: write 29 = 90

[ 14.509258] c0 wm8994-codec wm8994-codec: write 19 = 10b

[ 14.523664] c0 wm8994-codec wm8994-codec: write 6 = 8

[ 14.544749] c0 wm8994-codec wm8994-codec: write 480 = 6319

[ 14.546626] c0 wm8994-codec wm8994-codec: write 480 = 4b19

[ 14.546924] c0 wm8994-codec wm8994-codec: write 480 = 49d9

[ 14.547215] c0 wm8994-codec wm8994-codec: write 480 = 49d5

[ 14.547509] c0 wm8994-codec wm8994-codec: write 481 = 6b00

[ 14.553243] c2 wm8994-codec wm8994-codec: write 22 = 2

[ 14.553600] c0 wm8994-codec wm8994-codec: write 23 = 2

[ 14.554177] c0 wm8994-codec wm8994-codec: write 26 = 140

[ 14.554469] c0 wm8994-codec wm8994-codec: write 27 = 140

[ 14.587119] c1 wm8994-codec wm8994-codec: write 1a = 10a

[ 14.595785] c1 wm8994-codec wm8994-codec: write 22 = 0

[ 14.596126] c0 wm8994-codec wm8994-codec: write 23 = 0

[ 14.596433] c0 wm8994-codec wm8994-codec: write 25 = 160

[ 14.596727] c0 wm8994-codec wm8994-codec: write 25 = 164

[ 14.597027] c0 wm8994-codec wm8994-codec: write 26 = 179

[ 14.598970] c0 wm8994-codec wm8994-codec: write 27 = 179

[ 16.320747] c0 usb: usb_ready udc_enable=0

[ 18.240044] c0 max77693-muic max77693-muic: func:max77693_muic_usb_detect info->muic_data->sw_path:0

[ 18.240090] c0 MUIC usb_cb:1

[ 18.240107] c0 usb: muic: USB_CABLE_ATTACHED(1)

[ 18.240132] c0 usb: s3c_vbus_enable, ready u_e: 0, is_active: 1

[ 18.240163] c0 usb: s3c_vbus_enable is_active=1(udc_enable),softconnect=1

[ 18.240209] c0 s3c-usbgadget s3c-usbgadget: usb phy usage(22)

[ 18.240239] c0 s3c-usbgadget s3c-usbgadget: Already power on PHY

[ 18.244791] c0 usb: set_exynos_usb_phy_tune old phy0 tune=0x2819b3 t=0

[ 18.244834] c0 usb: set_exynos_usb_phy_tune new phy0 tune=0x2831b3