Replicant

Instructions to run and collect results of the android "Compatibility Test Suite":https://source.android.com/compatibility/cts/setup.html for "Replicant 4.2":https://redmine.replicant.us/projects/replicant/wiki/ReplicantStatus#Replicant-42

h1. Installation

* On a newly installed Ubuntu 14.04

* Install the "pre-built CTS":https://source.android.com/compatibility/cts/downloads.html (or "build it from source":https://source.android.com/compatibility/cts/development.html#building-and-running-cts)

** wget https://dl.google.com/dl/android/cts/android-cts-4.2_r4-linux_x86-arm.zip ; unzip android-cts-4.2_r4-linux_x86-arm.zip

** wget https://dl.google.com/dl/android/cts/android-cts-verifier-4.2_r5-linux_x86-arm.zip ; unzip android-cts-verifier-4.2_r5-linux_x86-arm.zip

** wget https://dl.google.com/dl/android/cts/android-cts-media-1.2.zip ; unzip android-cts-media-1.2.zip

* Install the dependencies

** apt-get update

** apt-get install -y android-tools-adb openjdk-6-jdk

h1. Device preparation

* Connect the Replicant 4.2 device to USB and verify *adb* sees it

   <pre>

# adb devices

List of devices attached

00090ad763a48f  device

4df1066d14d15fbd        device

   </pre>

* Configure the device (adapted from https://source.android.com/compatibility/cts/setup.html#config_device, not including Wifi, GPS, bluetooth since they are not supported)

** Factory data reset the device: *Settings > Backup & reset > Factory data reset*

** Set your device's language to English (United States) from: *Settings > Language & input > Language*

** Make sure no lock pattern or password is set on the device: *Settings > Security > Screen lock > None*

** Make sure no PIN lock is set on the device: *Settings > Security > PIN lock > None*

** Enable developer options: go to *Settings > About phone* and tap Build number seven times.

** Enable USB debugging on your device: *Settings > Developer options > USB debugging*

** Select: *Settings > Developer options > Stay Awake > On*

** Select: *Settings > Developer options > Verify apps over USB > Off*

** Connect the desktop machine that will be used to test the device with a USB cable. The system shows a dialog asking whether to accept an RSA key that allows debugging through this computer. Select Allow USB debugging.

** Install and configure helper apps on the device:

*** adb install -r android-cts/repository/testcases/CtsDelegatingAccessibilityService.apk

*** On the device, enable: *Settings > Accessibility > Accessibility > Delegating Accessibility Service*

** Copy the CTS media files to the device as follows:

   <pre>

# adb devices

List of devices attached

00090ad763a48f  device

4df1066d14d15fbd        device

# cd android-cts-media-1.2

# ./copy_media.sh all -s 00090ad763a48f

   </pre>

h1. Running CTS

It runs in the background and takes about 8 hours. It will display results as they become available. See "the usage documentation":https://source.android.com/compatibility/cts/run.html#using-cts-v1 for more information.

<pre>

# ./android-cts/tools/cts-tradefed

cts-tf > run cts --plan CTS

</pre>

The test results are in *./android-cts/repository/results/* and the logs in *./android-cts/repository/logs/*