GTA04Installation » History » Version 5
Paul Kocialkowski, 08/15/2012 11:59 AM
| 1 | 1 | Paul Kocialkowski | h1. GTA04 Installation |
|---|---|---|---|
| 2 | |||
| 3 | 4 | Paul Kocialkowski | h2. Installing for µSD card storage |
| 4 | 1 | Paul Kocialkowski | |
| 5 | 5 | Paul Kocialkowski | What you need is a microSD card that is at least 1Gio. Note that this document refers to the microSD card as @sdcard@. |
| 6 | 1 | Paul Kocialkowski | |
| 7 | 5 | Paul Kocialkowski | Make sure you have downloaded all the required files to install Replicant on sdcard: |
| 8 | * bootloader.img |
||
| 9 | * boot.scr |
||
| 10 | * boot.img |
||
| 11 | * system.tar.bz2 |
||
| 12 | |||
| 13 | 4 | Paul Kocialkowski | h3. Getting the install script |
| 14 | 1 | Paul Kocialkowski | |
| 15 | To make it easier to install Replicant on GTA04, you can use the install script: replicant_gta04_install.sh. |
||
| 16 | 4 | Paul Kocialkowski | It should be shipped with Replicant images or copied in @out/target/product/gta04/@ during the build process. |
| 17 | 1 | Paul Kocialkowski | If you cannot find the script, download the latest version from gitorious: "replicant_gta04_install.sh":https://gitorious.org/replicant/device_goldelico_gta04/blobs/raw/replicant-2.3/replicant_gta04_install.sh |
| 18 | |||
| 19 | 5 | Paul Kocialkowski | <pre> |
| 20 | Usage: ./replicant_gta04_install.sh [TYPE] [DRIVE] |
||
| 21 | 1 | Paul Kocialkowski | |
| 22 | 5 | Paul Kocialkowski | Arguments: |
| 23 | - The [TYPE] argument can either be: |
||
| 24 | * "install" to create an install sdcard |
||
| 25 | * "system" to create a system sdcard |
||
| 26 | - The [DRIVE] argument is the sdcard drive node and can be omitted |
||
| 27 | 1 | Paul Kocialkowski | |
| 28 | 5 | Paul Kocialkowski | Notes: |
| 29 | The following files must be present in the directory where you run the script: |
||
| 30 | * bootloader.img boot.scr boot.img (install) |
||
| 31 | * system.tar.bz2 (system) |
||
| 32 | </pre> |
||
| 33 | 1 | Paul Kocialkowski | |
| 34 | 5 | Paul Kocialkowski | h3. Creating an install sdcard |
| 35 | |||
| 36 | The install sdcard will flash the bootloader, the boot instructions and the kernel to the GTA04 NAND flash. |
||
| 37 | Make sure that the following files are in the directory where you run the script: @bootloader.img boot.scr boot.img@ |
||
| 38 | |||
| 39 | Process that way: |
||
| 40 | 1 | Paul Kocialkowski | <pre> |
| 41 | 5 | Paul Kocialkowski | ./replicant_gta04_install.sh install |
| 42 | </pre> |
||
| 43 | 1 | Paul Kocialkowski | |
| 44 | 5 | Paul Kocialkowski | If you know what the sdcard drive is, you can also specify it explicitly: |
| 45 | <pre> |
||
| 46 | ./replicant_gta04_install.sh install /dev/sde |
||
| 47 | 1 | Paul Kocialkowski | </pre> |
| 48 | |||
| 49 | 5 | Paul Kocialkowski | The script will then format the sdcard and copy the files. Once it has completed with success (@Your drive is now ready to be used!@), put the sdcard in the phone and boot. |
| 50 | It will flash the files to the GTA04 NAND flash. |
||
| 51 | |||
| 52 | The AUX (top left) led indicates the status: |
||
| 53 | |||
| 54 | |_. Led color |_. Status | |
||
| 55 | | Orange | Flashing | |
||
| 56 | | Yellow | Completed | |
||
| 57 | | Red | Error | |
||
| 58 | |||
| 59 | If flashing failed, you might need to get a serial cable to investigate what's going on. |