Replicant

h1. GalaxyNexusSerialConsole

* http://redmine.replicant.us/projects/replicant/wiki/S5PC110Bootloader works as a serial cable.

When you connect the cable you get the FIQ debugger, but what if you want kgdb instead:

* apply that patch:

<pre>

diff --git a/arch/arm/mach-omap2/board-tuna.c b/arch/arm/mach-omap2/board-tuna.c

index a022a43..7098227 100644

--- a/arch/arm/mach-omap2/board-tuna.c

+++ b/arch/arm/mach-omap2/board-tuna.c

@@ -1001,6 +1001,8 @@ static inline void __init board_serial_init(void)

        omap_serial_init_port_pads(0, uart1_pads, uart1_pads_sz, NULL);

        omap_serial_init_port_pads(1, tuna_uart2_pads,

                ARRAY_SIZE(tuna_uart2_pads), &tuna_uart2_info);

+       omap_serial_init_port_pads(2,tuna_uart3_pads,

+               ARRAY_SIZE(tuna_uart3_pads), NULL);

        omap_serial_init_port_pads(3, tuna_uart4_pads,

                                   ARRAY_SIZE(tuna_uart4_pads), NULL);

 }

</pre>

* remove the FIQ debugger in the kernel configuration.

* change the CMDLINE trough the kernel configuration:

Use:

<pre>CONFIG_CMDLINE="console=ttyO2 androidboot.console=ttyO2 [...]"</pre>

Instead of:

<pre>CONFIG_CMDLINE="console=ttyFIQ0 androidboot.console=ttyFIQ0 [...]"</pre>

* Verify that you get the kernel messages.

* Then change the cmdline for kgdb

<pre>

CONFIG_CMDLINE="kgdboc=ttyO2,115200 console=ttyO2 androidboot.console=ttyO2 [...]"

</pre>

Don't add kgdbwait tough because it result in that:

<pre>

(gdb) set remotebaud 115200

(gdb) target remote /dev/ttyUSB0

/dev/ttyUSB0: Device or resource busy.

(gdb) target remote /dev/ttyUSB0

Remote debugging using /dev/ttyUSB0

kgdb_breakpoint ()

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/kernel/debug/debug_core.c:954

954		arch_kgdb_breakpoint();

(gdb) c

Continuing.

Program received signal SIGSEGV, Segmentation fault.

__raw_spin_lock_irqsave (lock=0x288)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/kernel/spinlock.c:112

112	BUILD_LOCK_OPS(spin, raw_spinlock);

(gdb) bt

#0  __raw_spin_lock_irqsave (lock=0x288)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/kernel/spinlock.c:112

#1  0xc061aecc in _raw_spin_lock_irqsave (lock=0x288)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/kernel/spinlock.c:145

#2  0xc0098620 in try_to_wake_up (p=0x0, state=1611595795, wake_flags=1)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/kernel/sched.c:2681

#3  0xc009897c in wake_up_process (p=0x288)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/kernel/sched.c:2785

#4  0xc00e2090 in proc_dohung_task_timeout_secs (table=<value optimized out>, write=<value optimized out>, 

    buffer=<value optimized out>, lenp=<value optimized out>, ppos=0xc782bf70)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/kernel/hung_task.c:190

#5  0xc0174178 in proc_sys_call_handler (filp=<value optimized out>, buf=0x24808, count=1, ppos=0xc782bf70, 

    write=1) at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/fs/proc/proc_sysctl.c:158

#6  0xc01741b0 in proc_sys_write (filp=0x288, buf=0x600f0013 <Address 0x600f0013 out of bounds>, count=1, 

    ppos=0xc782a000)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/fs/proc/proc_sysctl.c:176

#7  0xc0126420 in vfs_write (file=0xc73be500, buf=0x24808 "0", count=<value optimized out>, pos=0xc782bf70)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/fs/read_write.c:377

#8  0xc0126590 in sys_write (fd=<value optimized out>, buf=0x24808 "0", count=1)

    at /home/gnutoo/embedded/android/replicant-4.0/kernel/samsung/tuna/fs/read_write.c:429

#9  0xc0055a00 in ?? ()

Cannot access memory at address 0x0

#10 0xc0055a00 in ?? ()

Cannot access memory at address 0x0

Backtrace stopped: previous frame identical to this frame (corrupt stack?)

</pre>