Actions
GalaxySIIIGTI9300 » History » Revision 34
« Previous |
Revision 34/98
(diff)
| Next »
Denis 'GNUtoo' Carikli, 08/13/2019 06:47 PM
fix last change typo
Galaxy S 3 (I9300)¶
- Table of contents
- Galaxy S 3 (I9300)
|
Device | Galaxy S 3 (I9300) |
| Manufacturer | Samsung | |
| Release date | May 2012 | |
| Codename | i9300 |
|
| Status | Maintained | |
| Maintainer(s) | Paul Kocialkowski | |
| Wolfgang Wiedmeyer | ||
| Supported models | GSM: GT-I9300 | |
| Latest images | Replicant 6.0 0003 |
Replicant status¶
Replicant status for the Galaxy S 3 (I9300): ReplicantStatus Replicant 6.0
Replicant installation¶
To install Replicant on the Galaxy S 3 (I9300), see the RecoveryInstallationWithHeimdall and MinorVersionUpgrade wiki pages.
Replicant usage¶
- Galaxy S 3 (I9300) compass calibration: GalaxyS3I9300CompassCalibration
Replicant build¶
Replicant build for the Galaxy S 3 (I9300): GalaxyS3I9300Build
Replicant development¶
- Galaxy S 3 (I9300) UART: GalaxyS3I9300UART
Freedom and privacy/security evaluation¶
See GalaxyS3I9300PrivacySecurityEvaluation for more details.
Research¶
Hardware table¶
| Component | Name | Source | Status |
|---|---|---|---|
| SoC | Samsung Exynos 4412 | iFixit | Linux kernel support |
| GPU | Mali 400 | wikipedia | Linux kernel and secret userspace |
| Audio Codec | WM8994 | Linux kernel | Linux kernel support (ALSA) |
| Modem | XMM6260 | Linux kernel | Free userspace implementation: Samsung-RIL/libsamsung-ipc |
| Wi-Fi | BCM4334 | Linux kernel | Linux kernel support, proprietary loaded firmware |
| Bluetooth | BCM4334 | Linux kernel | Linux kernel support, proprietary loaded firmware |
| NFC | PN544 | Linux kernel | Linux kernel support |
| GPS | BCM47511 | iFixit | Proprietary userspace, no free implementation: BCM4751 |
| Accelerometer | LSM330DLC | Linux kernel | Linux kernel support, free userspace |
| Compass | AKM8975 | Kernel sources | Linux kernel support, free userspace |
| Light/proximity sensor | CM36651 | Kernel sources | Linux kernel support, free userspace |
| Gyroscope | LSM330DLC | Kernel sources | Linux kernel support, free userspace |
| Barometer | LPS331AP | Kernel sources | Linux kernel support, free userspace |
| Camera (back) | S5C73M3 | Linux kernel | Linux kernel support, free userspace |
| Camera (front) | S5K6A3 | Linux kernel | Linux kernel support, free userspace, proprietary loaded firmware |
Software Configuration¶
- GalaxyS3I9300Pit: Galaxy S 3 (I9300) PIT (a partition table)
Partitions¶
| PIT | Linux name | block device | mount point | partition type | Description |
|---|---|---|---|---|---|
| BOOTLOADER | Not visible on Replicant 6.0 | None | The bootloader? | ||
| TZSW | Not visible on Replicant 6.0 | None | The signed TrustZone OS | ||
| PIT | Not visible on Replicant 6.0 | None | The PIT partition table | ||
| MD5HDR | Not visible on Replicant 6.0 | None | Used during boot to validate partitions? | ||
| BOTA0 | Not visible on Replicant 6.0 | None | ? | ||
| BOTA1 | Not visible on Replicant 6.0 | None | ? | ||
| EFS | /efs | ext4 | modem data partition | ||
| BOOT | mmcblk0p5 | None | bootimage (mkbootimg) | boot.img partition | |
| RECOVERY | mmcblk0p6 | None | bootimage (mkbootimg) | recovery partition | |
| CACHE | mmcblk0p8 | /cache | cache partition | ||
| SYSTEM | mmcblk0p9 | /system | ext4 | system partition | |
| USERDATA | mmcblk0p12 | /data | ext4 | data partition | |
Updated by Denis 'GNUtoo' Carikli about 6 years ago · 34 revisions