I9250Bootloader » History » Version 1
Denis 'GNUtoo' Carikli, 01/29/2020 07:07 PM
| 1 | 1 | Denis 'GNUtoo' Carikli | h1. I9250Bootloader |
|---|---|---|---|
| 2 | |||
| 3 | <pre> |
||
| 4 | ��====== VCELL : 409625, SOC : 100, nType : 4 ====== |
||
| 5 | [Charger] nScaledVCELL : 409625000, nDesriedSOC, : 98, nMaxSOC : 118, nMinSOC : 78 |
||
| 6 | * FB base addr = 0xbea70000! |
||
| 7 | * PANEL_S6E8AA0_ID_READ : 0x12, 0x8e, 0x9b. |
||
| 8 | [ omap_power_get_reset_source :47] PRM_RSTST : 0x2 |
||
| 9 | |||
| 10 | Autoboot (1 seconds) in progress, press any key to stop . |
||
| 11 | |||
| 12 | Autoboot aborted.. |
||
| 13 | SBL> |
||
| 14 | SBL> |
||
| 15 | SBL> |
||
| 16 | SBL> h��lp |
||
| 17 | command_loop: parse command error! (h��lp) |
||
| 18 | SBL> help |
||
| 19 | Following commands are supported: |
||
| 20 | * setenv |
||
| 21 | * saveenv |
||
| 22 | * printenv |
||
| 23 | * help |
||
| 24 | * reset |
||
| 25 | * boot |
||
| 26 | * kernel |
||
| 27 | * loadpart |
||
| 28 | * loadkernel |
||
| 29 | * erasepart |
||
| 30 | * omap_upload_rdx |
||
| 31 | * omap_test_button |
||
| 32 | * omap_test_hwinfo |
||
| 33 | * omap_set_gpio_level |
||
| 34 | * omap_get_gpio_level |
||
| 35 | * omap_test_twl6030 |
||
| 36 | * omap_test_power |
||
| 37 | * omap_reboot |
||
| 38 | * omap_halt |
||
| 39 | * omap_cmdline_power |
||
| 40 | * omap_test_kbd |
||
| 41 | * omap_test_usbacc |
||
| 42 | * usb |
||
| 43 | * omap_test_max17043 |
||
| 44 | * omap_test_fsa9480 |
||
| 45 | * omap_dump_sec_log_buf |
||
| 46 | * omap_test_sud |
||
| 47 | To get commands help, Type "help <command>" |
||
| 48 | SBL> |
||
| 49 | |||
| 50 | </pre> |