Librem5Phone » History » Version 9
Sebastian Krzyszkowiak, 01/26/2020 09:47 PM
| 1 | 1 | Denis 'GNUtoo' Carikli | h1. Librem5 |
|---|---|---|---|
| 2 | |||
| 3 | 8 | Sebastian Krzyszkowiak | Two early batches (Birch and Chestnut) of Librem 5 are already in the hands of backers and developers. Another batch, Dogwood, is expected in March 2020 and then a mass produced one, Evergreen, in Q2 2020. |
| 4 | |||
| 5 | 9 | Sebastian Krzyszkowiak | |_. Component | Hardware | Comments | |
| 6 | | SoC | iMX8M Quad CPU | * See "this post":https://puri.sm/posts/librem5-solving-the-first-fsf-ryf-hurdle/ about the nonfree DDR4 controller firmware |
||
| 7 | 1 | Denis 'GNUtoo' Carikli | * The bootloader (u-boot + ATF) is going to be fully free and redistributable by Replicant | |
| 8 | 9 | Sebastian Krzyszkowiak | | GPU | Vivante GC7000Lite | supported in mainline mesa by etnaviv driver | |
| 9 | | Display | 5.7″ 720x1440 display | | |
||
| 10 | | Memory | 3GB RAM LPDDR4-3200 | | |
||
| 11 | | eMMC | 32GB | plus a microSD slot | |
||
| 12 | | Wireless | Redpine RS9116 802.11abgn 2.4 Ghz / 5Ghz + Bluetooth 5 & BLE | with firmware loaded from an on-board flash memory | |
||
| 13 | | Audio | Wolfson Media WM8962 | | |
||
| 14 | | Baseband | Gemalto PLS8 or Broadmobi BM818 on replaceable M.2 card | * single SIM |
||
| 15 | 8 | Sebastian Krzyszkowiak | * both modems use QMI and AT |
| 16 | * connected via USB and I2S |
||
| 17 | * on-modem GNSS receiver has disabled antenna | |
||
| 18 | 9 | Sebastian Krzyszkowiak | | GPS | TESEO LIV3F multiconstellation GNSS receiver | TODO: |
| 19 | 1 | Denis 'GNUtoo' Carikli | * What protocol are used | |
| 20 | 9 | Sebastian Krzyszkowiak | | Motion sensor | STmicroelectronicts LSM9DS1 | | |
| 21 | | ALS/proximity | Vishay VCNL4040 | | |
||
| 22 | | Smartcard | 3FF format smart cards | early batches use 2FF format card |
||
| 23 | 8 | Sebastian Krzyszkowiak | TODO: |
| 24 | 1 | Denis 'GNUtoo' Carikli | * How is it connected? |
| 25 | * What Android frameworks do exist for smartcards | |
||
| 26 | 9 | Sebastian Krzyszkowiak | | Back Camera w/LED flash | 1/3" 13Mpx CMOS sensor, S5K3L6XX; 4224×3136 active pixels; |
| 27 | 8 | Sebastian Krzyszkowiak | 30fps @4K, 60fps @FHD, 120fps @HD; focusing range: 10cm - ∞ @AF; FOV: 81.5° | no drivers yet | |
| 28 | 9 | Sebastian Krzyszkowiak | | Front Camera | 1/4" 8Mpx CMOS sensor, YACG4D0C9SHC; 3264×2448 active pixels; |
| 29 | 8 | Sebastian Krzyszkowiak | 30fps @QUXGA, 60fps @FHD (Crop), 90fps @HD; focusing range: 28.9-65.0cm; FOV: 83.3° | no drivers yet | |
| 30 | 9 | Sebastian Krzyszkowiak | | USB | USB-C functions handled by TPS65982 |
| 31 | 8 | Sebastian Krzyszkowiak | charging handled by TI BQ25895 |
| 32 | 9 | Sebastian Krzyszkowiak | battery monitored by MAX17055 | * USB-C connector for PD charging, USB 3.0 client and host function, DisplayPort |
| 33 | * doesn't require a nonfree firmware to use the video out (via USB-C DisplayPort alt-mode) | |
||
| 34 | 7 | dl lud | |
| 35 | 1 | Denis 'GNUtoo' Carikli | h2. Schematics |
| 36 | |||
| 37 | 5 | Denis 'GNUtoo' Carikli | https://source.puri.sm/Librem5/l5-schematic/ |
| 38 | 1 | Denis 'GNUtoo' Carikli | |
| 39 | h2. References |
||
| 40 | |||
| 41 | * https://shop.puri.sm/shop/librem-5/ |
||
| 42 | * https://puri.sm/posts/librem-5-smartphone-final-specs-announced/ |
||
| 43 | 8 | Sebastian Krzyszkowiak | * https://developer.puri.sm/Librem5/Hardware_Reference.html |