Actions
OMAPBootrom » History » Revision 8
« Previous |
Revision 8/23
(diff)
| Next »
Denis 'GNUtoo' Carikli, 03/29/2020 12:24 AM
OMAPBootrom¶
Generic documentation¶
TODO: Read the various TRM and push the info to wikidata:- check the various SOCs the sram size limit in the TRM.
- check the load address / memory mapping of MLO in case of USB boot or boot from eMMC in the TRM.
- Check mmc1 booting constraint (card size, look if < 4GiB works) in the TRM
- Read the TRM sections about SYS_BOOT and booting and document that, ideally write a tool for it, or upstream the code in some other tool.
Documentation¶
The droiddevelopers website has some information on trying to use bugs run free software on several Motorola devices.
| Device | SOC |
| Motorola Milestone | OMAP 3430 |
| Motorola Milestone 2 | OMAP 3630 |
| Motorola Defy | OMAP3630? |
| Motorola Defy+ (MB526) | OMAP3 (which one?) |
- It has documentation on the structure of signed MLOs
- Read droiddevelopers more to understand restricted boot better.
- Also the OMAP wiki might have some information on OMAP restricted boot.
- Also look if there is substancial information in the Technical Reference Manual (TRM) about fuses but that's unlikely.
Code¶
- As march 2020, there are no fuses driver or code for any OMAP in either u-boot, Barebox, Linux, or crucible.
- U-boot documentation mention TI tools that have to be obtained after signing an NDA
- TODO: check if chipsec has infos on OMAP fuses
Possible attacks¶
- Even if it's unlikely, once we understand the OMAP restricted boot better, we could check if some devices are signed but not in enforcing mode.
Links¶
- http://www.droid-developers.org : This attempts to run user code on several Motorolla smartphones. It includes analysis of the boot chain:
Updated by Denis 'GNUtoo' Carikli over 5 years ago · 8 revisions