SafeMode » History » Revision 6
Revision 5 (doak complex, 01/19/2020 01:26 AM) → Revision 6/8 (doak complex, 01/19/2020 01:35 AM)
h1. Safe mode If your device is stuck in a boot loop (the device is crashing during boot, endlessly) after installing or updating applications, it is possible to recover from that by booting the device into _Safe Mode_ which will disable all applications that are not part of the Replicant image. **Warning:** This will purge There is a bug #1986 which purges all accounts, *including corresponding data*. data*, when booting into _Safe Mode_. Therefore, any not-yet-synced data (e.g. contacts, calendar appointments, etc.) which are bound to an account, as well as the account configuration itself, *will be lost*. Furthermore there is a bug #1986 in Replicant which causes the account configuration itself to be deleted as well. To boot into _Safe Mode_, press and hold down the "Volume Down" button during boot. In fact it is enough to hold the button for approximately one second during the short vibration near the end of the boot sequence. It does not matter if the key was hold down all the time nor if other keys are pressed/held as well. You will see a small dark box at the bottom left screen reading _Safe Mode_ if you have been successful. Just reboot your device to disable _Safe Mode_ again.