TestingInfrastructure » History » Revision 40
Revision 39 (Denis 'GNUtoo' Carikli, 03/18/2022 09:38 AM) → Revision 40/55 (Denis 'GNUtoo' Carikli, 03/18/2022 09:39 AM)
{{<toc}}
h1. TestingInfrastructure
h2. Applications that can be used to do some testing on the device
* https://f-droid.org/wiki/page/org.zeroxlab.zeroxbenchmark
h2. Projects and/or hardware that can be used to do functional testing
h3. Lava
"Lava":https://www.linaro.org/engineering/projects/lava/ can be used to do functional tests on real hardware. It can be easily installed on PureOS, an FSDG compliant GNU/Linux distribution.
h3. Labgrid
"Labgrid":https://labgrid.readthedocs.io/en/latest/ has features similar to Lava but it is probably easier to learn because it's probably way easier to get started with it.
h3. OsmoGSMTester
The "OsmoGSMTester project":https://osmocom.org/projects/osmo-gsm-tester is able to be interfaced with the Android RIL through ofono and can emulate a GSM network with the help of a compatible GSM base station or SDR.
This "presentation from 2019":https://media.ccc.de/v/osmodevcon2019-119-osmo-gsm-tester-e-gprs-test-setup has many insights on what kind of issue we might expect in interfacing it with smartphones.
h3. Simtrace2
The "Simtrace 2 project":https://osmocom.org/projects/simtrace2/wiki can be used, along with SIM card readers to programmatically feed a SIM card to a smartphone. This can be used to run test on real networks.
h2. Replicant supported devices and testing
h3. Requirements
* Antenna connector for the modem
* The ability to control the device buttons in order to be able to programmatically power on and off the device, and trigger boots into the bootloader and recovery
* Optionally a way to connect to the serial port, programmatically
h3. Galaxy SII (GT-I9100)
* The Galaxy SII (GT-I9100) has:
** An antenna connector. According to the "External Antenna Socket - WARNING forum thread on XDA":https://forum.xda-developers.com/t/external-antenna-socket-warning.1273292/page-6 , it's an MS-162
** The SOC serial port that is accessible behind the USB connector at a low voltage
** A full size mini-sim (easier to interface with)
Holding the smartphone in place:
* The smartphone could either be screwed on a metallic surface or an external case could be screwed on a metallic surface enabling the smartphone not to move.
SIM cards:
* Simtrace and Simtrace 2 both "lacks screw holes":https://osmocom.org/issues/3711 so a way must be found to make sure that it doesn't move as it uses flex cables to interface with the SIM socket of the smartphone. That may be fixed in a subsequent hardware revision.
Serial port and USB:
Buttons:
Battery:
Antenna connector and GSM tower or SDR:
The Galaxy SII (GT-I9100) has two antenna connectors:
* One internal connector, TODO: find the connector type
* One external connector, TODO: Find the connector type
h4. Example setup
See also the links inside the [[Serial_port]] article for more background on how to get serial port access on devices like the Galaxy SIII (GT-I9300) or the Galaxy SII (GT-I9100).
!i9100.jpg!
See https://git.replicant.us/contrib/GNUtoo/test-infrastructure.git for the source of the file.
h4. Using a device without a battery.
* "How to use a Galaxy SIII without a battery":https://techblog.jeppson.org/2017/12/revive-old-samsung-galaxy-s3/ : It doesn't look very safe to do that as the phone is probably not expecting 5V on the battery connector but it gives some idea of the peak tolerances.
* The Galaxy SIII 4G (GT-I9305) could probably work at lower voltages like 3.3V through the battery connector, but it would require testing it. In that case it might also be a good idea to test it in all configurations (all hardware features being used, cpuburn etc).
* The 4 pin 'FPC' style battery connector available from amazon, marketed as being for the 'S4 value edition i9515' (https://amazon.de/gp/product/B0813JBW8S) is capable of contacting the Galaxy SIII (GT-I9300)'s battery.
h4. Sumarry
| Device | Modem antenna connector | Compatible software | Comments |
| Motorolla C155 | MS-147 | * OsmocomBB
* Old Nuttx revisions | Could be used as reference phone as it's probably already supported by the Osmocom testing infrastructure |
| Galaxy SII (GT-I9100) | MS-162 | * Replicant 4.0, 4.2, 6.0
* Upstream Linux (partial) |
| Galaxy Nexus (GT-I9250) | ? | * Replicant 4.0, 4.2, 6.0 | We can get some GSM traces in wireshark with xgoldmon |
| Galaxy SIII (GT-I9300) | ? | * Replicant 4.0, 4.2, 6.0
* Upstream Linux (partial) |
h2. USB modems
When [[XMMProtocolInterfaces|trying to enable protocol tracing in modems]] we can connect the device modem (somewhat directly) to a laptop
Questions:
* Do we have samsung-ipc on top of the virtual UARTs?
* The cbd daemon mentioned "in the blog post about booting the Galaxy S7 modem":https://eighty-twenty.org/2020/09/10/booting-samsung-galaxy-s7-modem doesn't list UART as main link though.
* Adding the modem USB id when in debug mode (1519:0020) in a search engine shows various usb keys
* Do phones like the Galaxy SII have smasung-ipc on top of the USB link or UART links when in debug mode?
h2. Pure software setup
h3. lightweight test infrastructure for libsamsung-ipc
It might be possible to have a pure software test infrastructure with libsamsung-ipc.
It could be done more or less like that:
test script <-> ipc-modem or other programs <-> libsamsung-ipc <-> Linux kernel <-> VHCI <-> software sending USB packets
We have several choices for the Linux kernel:
| Kernels | Comments |
| User mode Linux (ARCH=um) | (+) Very lightweight, runs completely in userspace
(-) Requires patches for USB / VHCI |
| Linux + libvirt + kvm | (-) Require some virtualization setup that requires dedicated RAM
(+) Probably works unpatched |
And there is already some projects emulating usb devices:
| Project | Description | comments |
| gnuk | USB token software | can build for gnulinux |
| choptix | Library used by gnuk | More simple examples |
| simtrace2 ? | SIM tracing and MITM tool | Probably uses vusb for testing too |
So it might be possible to modify them to send some simple USB packets captured with wireshark / tshark / tcpdump.