WiFiAdapter » History » Version 2
Wolfgang Wiedmeyer, 03/26/2017 05:41 PM
update known issues notes
| 1 | 1 | Wolfgang Wiedmeyer | h1. Enabling WiFi with a USB WiFi adapter |
|---|---|---|---|
| 2 | |||
| 3 | All Replicant-supported devices need non-free firmware to be loaded to make the internal WiFi work. See the [[Wifi|WiFi research page]] for more information. Free replacements for the non-free firmware do not yet exist. |
||
| 4 | |||
| 5 | free firmware for adapters with AR9271 chipset |
||
| 6 | |||
| 7 | OTG-cable needed |
||
| 8 | |||
| 9 | h2. Supported WiFi adapters |
||
| 10 | |||
| 11 | link to some external resources that explain how the chipset can be identified on a GNU/Linux system |
||
| 12 | |||
| 13 | link to useful online hardware databases |
||
| 14 | |||
| 15 | h3. Known to work |
||
| 16 | |||
| 17 | h3. Should work but not tested |
||
| 18 | |||
| 19 | |||
| 20 | h2. Using the WiFi adapter with the RepWifi app |
||
| 21 | |||
| 22 | preferred |
||
| 23 | |||
| 24 | h2. Using the WiFi adapter with the WiFi scripts |
||
| 25 | |||
| 26 | h2. Known issues |
||
| 27 | |||
| 28 | high battery drain, possible battery damage or shortened lifecycle for batteries |
||
| 29 | |||
| 30 | adapter is not powered when low battery charge |
||
| 31 | |||
| 32 | 2 | Wolfgang Wiedmeyer | Displayed battery charge level may not be accurate (likely lower because of quick drain) |
| 33 | |||
| 34 | which devices work best? Note 2 (big battery) -> Galaxy S 3 -> Galaxy S 2 (instabilities, battery issues) |
||
| 35 | 1 | Wolfgang Wiedmeyer | |
| 36 | [[ReplicantUSBNetworking#Known-issues|Known issues for USB networking]] apply here, too. |