WiFiAdapter » History » Version 5
Wolfgang Wiedmeyer, 04/15/2017 11:27 AM
introduction
| 1 | 1 | Wolfgang Wiedmeyer | h1. Enabling WiFi with a USB WiFi adapter |
|---|---|---|---|
| 2 | |||
| 3 | 5 | Wolfgang Wiedmeyer | All Replicant-supported devices need non-free firmware to be loaded to make the internal WiFi component work. See the [[Wifi|WiFi research page]] for more information. Free replacements for the non-free firmwares do not yet exist. |
| 4 | 3 | Wolfgang Wiedmeyer | |
| 5 | 5 | Wolfgang Wiedmeyer | However, free firmware does exist for WiFi adapters with the AR9271 chipset. Such adapters can be used with a device running Replicant 6.0. A USB OTG (On-The-Go) cable is needed to connect the WiFi adapter to the phone. |
| 6 | 1 | Wolfgang Wiedmeyer | |
| 7 | h2. Supported WiFi adapters |
||
| 8 | |||
| 9 | link to some external resources that explain how the chipset can be identified on a GNU/Linux system |
||
| 10 | |||
| 11 | link to useful online hardware databases |
||
| 12 | |||
| 13 | h3. Known to work |
||
| 14 | |||
| 15 | h3. Should work but not tested |
||
| 16 | |||
| 17 | |||
| 18 | h2. Using the WiFi adapter with the RepWifi app |
||
| 19 | |||
| 20 | preferred |
||
| 21 | |||
| 22 | h2. Using the WiFi adapter with the WiFi scripts |
||
| 23 | |||
| 24 | h2. Known issues |
||
| 25 | |||
| 26 | high battery drain, possible battery damage or shortened lifecycle for batteries |
||
| 27 | |||
| 28 | adapter is not powered when low battery charge |
||
| 29 | |||
| 30 | 2 | Wolfgang Wiedmeyer | Displayed battery charge level may not be accurate (likely lower because of quick drain) |
| 31 | |||
| 32 | 4 | Wolfgang Wiedmeyer | which devices work best? Note 2 (big battery) -> Galaxy S 3 -> Galaxy S 2 (instabilities, battery issues, see #1791) |
| 33 | 1 | Wolfgang Wiedmeyer | |
| 34 | [[ReplicantUSBNetworking#Known-issues|Known issues for USB networking]] apply here, too. |